I'm using Amunters BitX 40 sketch and when I power up the BitX 40 VFO reads 7.000 and I'm unable to change frequency? with the tuning pot. Any Idea what I can do?
Thanks, Scot WB7AVU

Make sure the ptt sense is wired correctly. It may be booting in tx and not showing. The rig may not be txing rf power but might be false tripped in the raduino. Make sure the tuning pot is right as well.


--
David

?N8DAH

开云体育

Scot has one of my RaduinoX PCBs.?? So he likely has a wrong connection to get the pot to A7 on the Nano.

I have sent him board pictures and schematics to help.?? The PCB is silk-screened with the Connector # and pin 1 on all connectors.? So it is just a matter of checking his wiring and making sure A7 is what his software is expecting as Tuning input pin.

He is probably OK now?

73's

Mike, WA6ISP

I'm using Amunters BitX 40 sketch and when I power up the BitX 40 VFO reads 7.000 and I'm unable to change frequency? with the tuning pot. Any Idea what I can do?
Thanks, Scot WB7AVU

-- 
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID  "MotDog@..."
Mike@...