BITX40 V2.3 update

DaveC #40060 Hi all Just completed the mods and installed V2.03 of the firmware on my BITX40, a vast improvement over the original firmware and it's working well. I only have one problem. When I first switched it on I could only get LSB and USB when changing modes. When I keyed up the TX it switched to CWL and now I can only get CWL and CWU on the mode function. Anyone have any ideas or a solution for it. Dave G8PGO
Allard PE1NWL All Messages By This Member #40067 Dave, this is because semi QSK is ON. Press the CW key down to automatically switch to CW, Press PTT to automatically switch to SSB. This behaviour will be disabled when you set semi QSK to OFF. 73 Allard PE1NWL toggle quoted message Show quoted text On Wed, January 24, 2018 17:23, DaveC wrote: Hi all Just completed the mods and installed V2.03 of the firmware on my BITX40, a vast improvement over the original firmware and it's working well. I only have one problem. When I first switched it on I could only get LSB and USB when changing modes. When I keyed up the TX it switched to CWL and now I can only get CWL and CWU on the mode function. Anyone have any ideas or a solution for it. Dave G8PGO
DaveC #40205 Allard Thanks 73 Dave G8PGO

开云体育