开云体育

Is there a menu choice or switch to change tuning rate? I must have missed it. Pushing the vfo encoder gets a menu but I don’t see a place to set that.
-John N4HNO?

Hi John,
It's not menu driven in factory firmware. No switch / Arduino pin value to sample to change step size.
Step size changes based on the the number of encoder pulses captured during the sample time.?
These step size values are hard coded.

Hi John,

As Gary stated the stock software does not have a tuning step size adjustment.? The KD8CEC firmware does, and it is free.? The CEC firmware works with the Nextion screen as well as the stock screen and a number of others.

Here is the link to the GitHub repository:

Be sure to select the correct file to use Xloader with the hex file, or to set the correct values in the ubitx.h file.

I would recommend XLoader if you are not familiar with the Arduino IDE:


73
Evan
AC9TU

Thanks all! I just pulled out the old board and couldn’t remember how this worked. It’s been a few years.
-John