¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

Case Measurements uBITX v6

Bob Betts
 

Our club is considering several of these xcievers for our emergency team members. One will be rack mounted in a van and another permanently installed in a rack at the Comm Center and one or two more will be portable. A 2RU rack will accommodate a 3.5" height. Would someone be kind enough to tell me the overall height of the standard uBITX v6 cabinet?

I'll post the progress of our builds here. These will probably include built-in tuner, preselector with BCB switchable stop filter, and an enhanced audio section.

Thanks in advance.

Bob, N1KPR
 

Maybe this pic will help.


Reed
 

Also note that the feet are optional.


Reed
 

Hi Reed,

I was going to point out that without the feet it will fit in that 3.5 inch height. I hope it is not too wide to fit a rack <evil grin>.

73,

Bill KU8H

bark less - wag more

On 7/13/20 9:28 PM, Reed N wrote:
Also note that the feet are optional.
Reed
 

Thanks Reed.
It appears that the actual case is 3 1/8" high.
I appreciate your help.

Bob, N1KPR

NOTE Pls add backup address to your phone book: rwbetts@...

http://www.bobsamerica.com? http://www.youtube.com/n1kpr

Engineering: Where Enigma meets Paradox


On Monday, July 13, 2020, 10:02:20 PM EDT, Bill Cromwell <wrcromwell@...> wrote:


Hi Reed,

I was going to point out that without the feet it will fit in that 3.5
inch height. I hope it is not too wide to fit a rack <evil grin>.

73,

Bill? KU8H

bark less - wag more


On 7/13/20 9:28 PM, Reed N wrote:
> Also note that the feet are optional.
>
>
> Reed
>



1 - 5 of 5