|
I don't completely understand the I2c and need to get a pressure transducer that doesn't conflict with the I2C address of the TFT display that Ashar is using.
Can anyone explain to me which I2C address NOT to purchase on the pressure transducers?? ?They come in multiple different (fixed) I2C addresses. thanks, sorry for the dumb quesiton but time limited here. Gordon |
|
Jack, W8TEE
Consider his code: XPT2046_Touchscreen ts(CS_PIN); Adafruit_ILI9341 tft = Adafruit_ILI9341(TFT_CS, TFT_DC); The ILI9341 is usually associated with SPI interfaces, so doesn't use a slave address. Jack, W8TEE
On Thursday, March 26, 2020, 11:17:29 AM EDT, Evan Hand <elhandjr@...> wrote:
Could you not get the address from the github source code? 73 Evan AC9TU -- Jack, W8TEE |
|
thank you! gordon On Thu, Mar 26, 2020 at 11:23 AM AC9NM - Jerry Ponko <ac9nm.jp@...> wrote: The tft display uses the SPI bus and not the I2C bus. The only conflict on the I2C bus I can think of would be with the Si5351 which is at address 0x60. |
|
Gordon, The I2C is brought out on a connector (similar to the ubitx wire connectors). It has 5 pins : GND,?+3.3v, 5V, A5, A4. You can connect any I2C device to it. More in an hour?or so. - f On Thu, Mar 26, 2020 at 8:55 PM Gordon Gibby <docvacuumtubes@...> wrote:
|
¿ªÔÆÌåÓýGordon, the V6 display does not use the I2C bus at all. ?It is an SPI device, not I2C. ?The only I2C device is the Si5351 which uses I2C address 60. ?Jim, W0EB On Mar 26, 2020, at 10:39 AM, Gordon Gibby <docvacuumtubes@...> wrote:
|
|
Thanks everyone!! On Thu, Mar 26, 2020 at 11:48 AM Jim Sheldon <w0eb@...> wrote:
|
|
Doc,
toggle quoted message
Show quoted text
? ?I've used these utilities to scan the bus for existing addresses.? Good tools to have in the drawer.? ? ?Good hunting! ? ? 73, Andy On Thu, Mar 26, 2020 at 09:29 AM, Gordon Gibby wrote: I don't completely understand the I2c and need to get a pressure transducer that doesn't conflict with the I2C address of the TFT display that Ashar is using. |
Jim Sheldon