¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

Latest Firmware

 

Hi everyone, I'm a little late to the party being that I've just completed my Bitx40 build last week. ?I still have a minor bug to work out but hopefully that will be resolved in a few days. ?

I will be using mine for phone only. ?Out of the box mine has the stock version of firmware in it. ?I haven't added the suggested tuning lock buttons to it yet either but they are on the way. ?If I upgrade to the v1.18 version firmware are there any additional switches that I need to add? ?Is there an S meter in the latest firmware?

To me it looks like if I update the firmware and want to go back to the original version, the listing in the Files directory here in the group has something called "B40SoftwareRel0100.ino". ?Is that the original firmware?

Thanks
 

Sorry guys for the double post. ?I did end up receiving an answer from Michael. ?I thought maybe I should have made a new post and that's why I didn't receive an answer. ?I tried to delete this original message but it looks like it didn't work. ?Sorry....newbie here.
 

¿ªÔÆÌåÓý

No, my friend,
This is the release for the TFT/VFo from Jack Purdum
?
The latest release for raduino is the V1.18 from Allard
please the following:
Regrads
Caros CX8ABF, 73
----------------------------------------------------------------------------------------------------------------
I've just released raduino_v1.18, download it from

New in this release:
  • improved CW performance at higher CW speeds:
    - reduced the delay at the start of CW transmissions (first dit is no longer lost at high speed CW)
    - optimized timings so that 1:3 CW-ratio is kept even at high CW speed
  • improved FINE TUNE mode so that exact frequency (at 1 Hz precision) is displayed while the SPOT button is held pressed
  • added an extra option in the SETTINGS menu for setting semiQSK ON or OFF.
    This may be useful for CW operators who want to manually activate the PTT (e.g. using a foot switch).
    - if semiQSK is ON:
    ???? radio will automatically switch to CWL (or CWU), and go into TX mode when the morse key goes down
    ???? go back to RX automatically when the QSKdelay time is exceeded
    ???? radio will switch back to LSB (or USB) when the operator presses the PTT switch
    - if semiQSK is OFF:
    ???? operator must activate PTT manually to move the radio in TX
    ???? pressing the PTT does not affect the mode. Use the Function Button to select the desired mode (LSB-USB-CWL-CWU)
  • corrected a bug that FINE TUNE was not properly applied in USB mode

Happy BitX-ing!

73 Allard PE1NWL
?
?
?
?
?

From: Kc3hjp@...
Sent: Monday, July 10, 2017 12:57 PM
Subject: [BITX20] Latest Firmware
?
Hi everyone, I'm a little late to the party being that I've just completed my Bitx40 build last week.? I still have a minor bug to work out but hopefully that will be resolved in a few days.?

I will be using mine for phone only.? Out of the box mine has the stock version of firmware in it.? I haven't added the suggested tuning lock buttons to it yet either but they are on the way.? If I upgrade to the v1.18 version firmware are there any additional switches that I need to add?? Is there an S meter in the latest firmware?

To me it looks like if I update the firmware and want to go back to the original version, the listing in the Files directory here in the group has something called "B40SoftwareRel0100.ino".? Is that the original firmware?

Thanks

 

Ashhar Faran's original firmware v1.01, which was the base from where I started developing my raduino sketch, can be downloaded from .

All subsequent sketch versions 1.02 through 1.18 I released since are available at

73 Allard PE1NWL

1 - 4 of 4