¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

LSB to USB

Trent Trent
 

Hi everyone I was wondering if theres a way to switch between lsb and usb so I cam talk and or do digi modes
 

Our groups Raduino Rock Star Allard has put together a package for us, read the instructions. Hear is the link.
https://github.com/amunters/bitx40
Trent Trent
 

That is useless as i have a rotary encoder


On 9 Jun. 2017 11:34 am, "John Smith via Groups.Io" <johnlinux77=[email protected]> wrote:
Our groups Raduino Rock Star Allard has put together a package for us, read the instructions. Hear is the link.
 

A good working solution :



Works well and its for a rotary

Joe
VE1BWV

On Fri, Jun 9, 2017 at 12:18 AM, Trent Trent <vk7hrs@...> wrote:

That is useless as i have a rotary encoder


On 9 Jun. 2017 11:34 am, "John Smith via Groups.Io" <johnlinux77=yahoo.com@groups.io> wrote:
Our groups Raduino Rock Star Allard has put together a package for us, read the instructions. Hear is the link.
 

With the raduino you will have to enable USB and it'll switch the VFO to +12mhz offset instead of -12mhz offset. I did this on my BITX40 though I use the QRP Labs VFO. The principal is the same. You do have to remove C91 and C92 to make it work:



--
Ryan Flowers W7RLF

?

?<-- Learn how to go digital on the BITX40
Trent Trent
 

The problem is that he uses a different encoder where I use a eBay encoder


On 9 Jun. 2017 4:55 pm, "Ryan Flowers" <geocrasher@...> wrote:
With the raduino you will have to enable USB and it'll switch the VFO to +12mhz offset instead of -12mhz offset. I did this on my BITX40 though I use the QRP Labs VFO. The principal is the same. You do have to remove C91 and C92 to make it work:



--
Ryan Flowers W7RLF

?

?<-- Learn how to go digital on the BITX40

1 - 6 of 6