开云体育

No output Bitx40 raduino

Chuck Kemmer All Messages By This Member #21130 Bitx40 raduino, was low output, now no output.? Watt meter gives a quick spike to about .25W, then zero Watts. Any help is appreciated. Chuck AC7QN
Chuck Kemmer All Messages By This Member #21147 No relay action with PA pwr unplugged.? Also display goes blank when PA pwr is unplugged. Chuck AC7QN
ron van doremalen (PA3FAT) All Messages By This Member #21148 开云体育 We got it. ? And with the regular PWR you do have RX? We still talk about PA-PWR or PWR? According to the schematics PA-PWR you should indeed not have lcd/or anything working and no power at all on TX. ? ? toggle quoted message Show quoted text Van: [email protected] [mailto:[email protected]] Namens Chuck Kemmer Verzonden: 30 January, 2017 18:29 Aan: [email protected] Onderwerp: Re: [BITX20] No output Bitx40 raduino ? No relay action with PA pwr unplugged.? Also display goes blank when PA pwr is unplugged. Chuck AC7QN
Chuck Kemmer All Messages By This Member #21150 On Mon, Jan 30, 2017 at 09:31 am, ron van doremalen wrote: We got it. ? And with the regular PWR you do have RX? We still talk about PA-PWR or PWR? According to the schematics PA-PWR you should indeed not have lcd/or anything working and no power at all on TX. ? ? Van: [email protected] [mailto:[email protected]] Namens Chuck Kemmer Verzonden: 30 January, 2017 18:29 Aan: [email protected] Onderwerp: Re: [BITX20] No output Bitx40 raduino ? No relay action with PA pwr unplugged.? Also display goes blank when PA pwr is unplugged. Chuck AC7QN ? With regular PWR connected and PA PWR connected there is RX. With regular PWR connected and PA PWR disconnect there is no RX Chuck AC7QN
ron van doremalen (PA3FAT) All Messages By This Member #21151 开云体育 That’s very odd….PWR should bring you RX and at least driver for the PA. PA-PWR is only for the final amp…and isolated (should be) from the rest of the board…. ? toggle quoted message Show quoted text Van: [email protected] [mailto:[email protected]] Namens Chuck Kemmer Verzonden: 30 January, 2017 18:55 Aan: [email protected] Onderwerp: Re: [BITX20] No output Bitx40 raduino ? On Mon, Jan 30, 2017 at 09:31 am, ron van doremalen wrote: We got it. ? And with the regular PWR you do have RX? We still talk about PA-PWR or PWR? According to the schematics PA-PWR you should indeed not have lcd/or anything working and no power at all on TX. ? ? Van: [email protected] [mailto:[email protected]] Namens Chuck Kemmer Verzonden: 30 January, 2017 18:29 Aan: [email protected] Onderwerp: Re: [BITX20] No output Bitx40 raduino ? No relay action with PA pwr unplugged.? Also display goes blank when PA pwr is unplugged. Chuck AC7QN ? With regular PWR connected and PA PWR connected there is RX. With regular PWR connected and PA PWR disconnect there is no RX Chuck AC7QN
Chuck Kemmer All Messages By This Member #21152 I found a problem with power connector to supply.? The 5.1 mm or whatever size it is. I'll report back as I learn more. Chuck Tnx for the response.
Chuck Kemmer All Messages By This Member #21164 On Mon, Jan 30, 2017 at 10:30 am, Chuck Kemmer wrote: I found a problem with power connector to supply.? The 5.1 mm or whatever size it is. I'll report back as I learn more. Chuck Tnx for the response. ? OK, I repaired power socket.? Relays are functional.? I think the PA PWR had a good ground and the regular power and display didn't.? The board only had a good ground when PA PWR was connected. Looks like Q13 isn't conducting.? I'll replace that next. Thanks for your response. Chuck AC7QN
Raj vu2zap Member Profile All Messages By This Member #21173 Chuck, The regular power connect black wire is not making contact with the pin or wire is cut. Try a direct wire from PS to the ground point on the board! Raj toggle quoted message Show quoted text With regular PWR connected and PA PWR connected there is RX. With regular PWR connected and PA PWR disconnect there is no RX Chuck AC7QN
Chuck Kemmer All Messages By This Member #21207 On Mon, Jan 30, 2017 at 08:29 pm, Raj vu2zap wrote: Chuck, The regular power connect black wire is not making contact with the pin or wire is cut. Try a direct wire from PS to the ground point on the board! Raj With regular PWR connected and PA PWR connected there is RX. With regular PWR connected and PA PWR disconnect there is no RX Chuck AC7QN ? Thanks Raj, Rig relays are working. ?Both PWR and display had bad ground while PA PWR had good ground. Chuck
Jerry Gaffke All Messages By This Member #21619 Chuck, You ever get that thing working? ? I believe this is the last we heard from you. toggle quoted message Show quoted text On Tue, Jan 31, 2017 at 09:55 am, Chuck Kemmer wrote: Rig relays are working. ?Both PWR and display had bad ground while PA PWR had good ground. ?
Chuck Kemmer All Messages By This Member #21632 On Mon, Feb 6, 2017 at 11:16 am, Jerry Gaffke wrote: Chuck, You ever get that thing working? ? I believe this is the last we heard from you. Yes, IT'S ALIVE!? Seems to be working as it should.? I've been checking into Noon Time Net 7.2685.? Today I got S5 report.? I'm close to Tacoma, Wa; they are in Reno, Nevada.? Also doing some testing with other local Bitx40 owners.? Things are good. On Tue, Jan 31, 2017 at 09:55 am, Chuck Kemmer wrote: Rig relays are working. ?Both PWR and display had bad ground while PA PWR had good ground. ? ?

Previous Topic Next Topic