开云体育

Help with Digital VFO install

[email protected] #19117 Here is my hack problem. I have the new BITX40 V3 SMD board and want to use a IK3OIL FLL with it. I found where to take the output on the BITX board for the INPUT on the IK3OIL FLL. ?Do I put the + side of a 0.047uf cap to the board in series with the connection to the INPUT on the FLL? When I install the VC line from the FLL where do I install it on the BITX board ? ?I believe that I have to remove the VFO coil and tuning capacitor in the BITX VFO when I install the FLL VFO. ? Plus do I use a 100K resistor in series with the connection at the BITX board on this VC line? Thanks and a Merry Christmas to everyoneyou...
Mark W #19123 开云体育 ? ? ? toggle quoted message Show quoted text From: BITX20@... [mailto:BITX20@...] Sent: Saturday, December 17, 2016 2:58 PM To: BITX20@... Subject: [BITX20] Help with Digital VFO install ? ? Here is my hack problem. I have the new BITX40 V3 SMD board and want to use a IK3OIL FLL with it. ? I found where to take the output on the BITX board for the INPUT on the IK3OIL FLL. ?Do I put the + side of a 0.047uf cap to the board in series with the connection to the INPUT on the FLL? When I install the VC line from the FLL where do I install it on the BITX board ? ?I believe that I have to remove the VFO coil and tuning capacitor in the BITX VFO when I install the FLL VFO. ? Plus do I use a 100K resistor in series with the connection at the BITX board on this VC line? Thanks and a Merry Christmas to everyoneyou... ?

Previous Topic Next Topic