New Surface Mount Kit Not Working, Current Draw?

[email protected] #18698 A buddy bought a SMD pre-assembled board and says it's completely deaf, while he can hear lots of band activity with his FT-817ND. I volunteered to go over it with my scope and diagnose it. First things first: What's the typical approximate current draw in milliamps for these boards on a 12.0 volt power supply in receive mode? (Knowing the expected current draw will allow me a rough determination of any gross circuit faults before I start tracing and probing.)
Ashhar Farhan All Messages By This Member #18706 the current draw is 90ma in receive - f toggle quoted message Show quoted text On 28-Nov-2016 4:24 am, "qrpbuilder@... [BITX20]" <BITX20@...> wrote: ? A buddy bought a SMD pre-assembled board and says it's completely deaf, while he can hear lots of band activity with his FT-817ND. I volunteered to go over it with my scope and diagnose it. First things first: What's the typical approximate current draw in milliamps for these boards on a 12.0 volt power supply in receive mode? (Knowing the expected current draw will allow me a rough determination of any gross circuit faults before I start tracing and probing.)
[email protected] #18712 Thanks

开云体育