开云体育

KD8CEC and S-Meter

V Zecchinelli #72072 Good Morning, I am having difficulty activating the S Meter.? I have it checked in Memory Manager V1.11 and have tried several different number configurations along with S Meter box checked and nothing shows on S Meter. Memory Manager = V1.11 KD6CEC = V1.2 UbitX = V5 Am I missing something anywhere?? UbitX.h shows "//Select betwen Analog S-Meter and DSP (I2C) Meter #define USE_I2CSMETER" Thanks, Vince
Adrien F4IJA #72073 If you're not on I2C, you need to comment this line because you want to use A7 to work with it. -- 73's Adrien F4IJA
Evan Hand All Messages By This Member #72074 Just to confirm that you did connect the diode, cap and resistor per the KD8CEC directions to measure the audio output at the high connection of the volume control? FWIW 73 Evan AC9TU
V Zecchinelli #72077 开云体育 Thanks Evan.? No, I had not seen this.? I think I found it here .? A2 is A2 on the Nano or Pin 2 on the Analog Raduino connector which seems to be Pin 3 for A2 on the Nano? Vince On 9/24/2019 9:26 AM, Evan Hand wrote: toggle quoted message Show quoted text Just to confirm that you did connect the diode, cap and resistor per the KD8CEC directions to measure the audio output at the high connection of the volume control? FWIW 73 Evan AC9TU
V Zecchinelli #72078 开云体育 I am using Nextion so using I2C.? I should have mentioned Nextion in original email. Thanks, Vince On 9/24/2019 9:19 AM, Adrien F4IJA wrote: toggle quoted message Show quoted text If you're not on I2C, you need to comment this line because you want to use A7 to work with it. -- 73's Adrien F4IJA
PA3GYV - Werner All Messages By This Member #72079 Another idea is to install the extra nano (with s meter firmware) and install the _s firmware on the randiuno. The S meter also works a bit faster then.?
Evan Hand All Messages By This Member #72082 Vince, There are 2 versions of the CEC software for each of the display types.? The difference is one uses a seperate I2C connected Nano to add functionality.? The other uses the spare input pin on the Nano to connect the S-Meter. Read the FileNameInfo.txt file to insure that you use the correct one. The added hardware sensor for the direct connected S-Meter is in this article on the HamsKey web page: If you add a second Nano then this is the article on how to connect it: If you go the rout of adding the I2C connected Nano, then there are other functions that can be added beyond the S-Meter.? As Werner suggested. So the choice is yours.? That is the beauty of the uBitx and the great additions that Dr. Lee (KD8CEC) have provided. 73 Evan AC9TU??
V Zecchinelli #72083 开云体育 Super.? Thanks. On 9/24/2019 11:29 AM, Evan Hand wrote: toggle quoted message Show quoted text Vince, There are 2 versions of the CEC software for each of the display types.? The difference is one uses a seperate I2C connected Nano to add functionality.? The other uses the spare input pin on the Nano to connect the S-Meter. Read the FileNameInfo.txt file to insure that you use the correct one. The added hardware sensor for the direct connected S-Meter is in this article on the HamsKey web page: If you add a second Nano then this is the article on how to connect it: If you go the rout of adding the I2C connected Nano, then there are other functions that can be added beyond the S-Meter.? As Werner suggested. So the choice is yours.? That is the beauty of the uBitx and the great additions that Dr. Lee (KD8CEC) have provided. 73 Evan AC9TU??
V Zecchinelli #72084 开云体育 I saw the S meter firmware but wasn't sure what it was about.? Got it.? Thanks. On 9/24/2019 10:42 AM, Werner de Vos wrote: toggle quoted message Show quoted text Another idea is to install the extra nano (with s meter firmware) and install the _s firmware on the randiuno. The S meter also works a bit faster then.?

Previous Topic Next Topic