开云体育

i2c signal meter/analyser/dsp/cw decoder

Sourav #67852 开云体育 Hi, ? Can anybody pl confirm which firmware .hex to run the DSP signal meter & CW decoder option . I use nextion adv 3.5”. Fyi, the S-meter function works normally, but DSP1 & CW setup buttons don’t appear on the control menu ??!! ? I’m using – #for 1^st Arduino (ubitx): ???????????UBITX_CEC_V1.200_NX_S.hex? (tried v1.097 & v1.10 too !!) ? #for 2^nd Arduino (sig.sensor): ??I tried all the below found online, but w/o success CEC_I2C_Meter_V0.8.hex DSPMeter1_V0.7.hex i2cmeter1.ino.hex ? In dspmeterv1-master uploaded few days back ( ) there’s no .hex files !! ? All wiring as per- Standalone Signal Analyzer (I2C Type Signal-Meter) for uBITX #2 - Nextion LCD Standalone Signal Analyzer (I2C Type Signal-Meter) for uBITX #3 - Advanced and FFT ? 73s, Vu3Cgb- Sourav ? ?? ?
Vic WA4THR All Messages By This Member #67875 To get? those extra buttons and some other updated features like the CW speed arrows on the main screen you need to update the Nextion GUI. Look for "UBITX_Nextion_GUI_V3.zip" =Vic=
Kelly Mabry #67876 Vic and Sourav, thank you for posting this as I have the exact same problem... thank goodness for this forum! 73,? Kelly K5AID?
Sourav #67880 开云体育 Thanks Vic, I modified the GUI from- ubitx_35E6.tft ?to ?ubitx_35_E.tft ?and its solved now... Non the less I only get half of the nextion screen filled !! Regards, Sourav? On 16-Apr-2019, at 3:15 PM, Vic WA4THR via Groups.Io <vhklein@...> wrote: To get? those extra buttons and some other updated features like the CW speed arrows on the main screen you need to update the Nextion GUI. Look for "UBITX_Nextion_GUI_V3.zip" =Vic= _._,_._,_ From:?Sourav <sourav.relja@...>? Sent:?15 April 2019 10:56 PM To:?'[email protected]' <[email protected]> Subject:?i2c signal meter/analyser/dsp/cw decoder? Importance:?High ? Hi, ? Can anybody pl confirm which firmware .hex to run the DSP signal meter & CW decoder option . I use nextion adv 3.5”. Fyi, the S-meter function works normally, but DSP1 & CW setup buttons don’t appear on the control menu ??!! ? I’m using –? #for 1^st?Arduino (ubitx): ???????????UBITX_CEC_V1.200_NX_S.hex? (tried v1.097 & v1.10 too !!) ? #for 2^nd?Arduino (sig.sensor): ??I tried all the below found online, but w/o success CEC_I2C_Meter_V0.8.hex? DSPMeter1_V0.7.hex? i2cmeter1.ino.hex ? In dspmeterv1-master uploaded few days back (?) there’s no .hex files !! ? All wiring as per- Standalone Signal Analyzer (I2C Type Signal-Meter) for uBITX #2 - Nextion LCD Standalone Signal Analyzer (I2C Type Signal-Meter) for uBITX #3 - Advanced and FFT ? 73s, Vu3Cgb- Sourav,_._,_
Matt 9V1MH/VK2AMH/YF2AAH All Messages By This Member #67912 Hi when you say modified what do you mean - what steps did you take? when I was resizing - it was important to note that the image files need to be the coirrect size resolution for the display see the nextion site for the actual resolution per display and i also had to resize the area of the background image in the nextion editor to cover the whole display if you do not resizze the display area then the image is fitted into a smaller area this is independent of selecting a ddifferenty size device in the setup - as this only resizes the canvas - not the elements Matt
Sourav #67914 开云体育 Hi Matt, Pl note i chkd in the editor app that ubitx_35E6.hmi (which was originally written for 3.5" 320x480 res.) didnt hav the 13th& 14th pages- pdsp & pcw mean for dsp & cw setup.? Whereas the ubitx_35_E.hmi did hav these pages but was scaled down to 240x320 So, i saves these two pages and then imported them into?ubitx_35E6.hmi...compiled & saved as .tft via 'open build folder' tab But the res. remained 240x320 half filled in my 3.5" screen. So, now i'm? again editing the background templates to 320x480 and repositioning the buttons/attributes ! NexEditior is pretty interesting, u can do whole lot of customisations.... 73s Sourav_Vu3Cgb toggle quoted message Show quoted text On 17-Apr-2019, at 9:29 AM, Matt 9V1MH / VK3AMH <matthoward.sg@...> wrote: Hi when you say modified what do you mean - what steps did you take? when I was resizing - it was important to note that the image files need to be the coirrect size resolution for the display see the nextion site for the actual resolution per display and i also had to resize the area of the background image in the nextion editor to cover the whole display if you do not resizze the display area then the image is fitted into a smaller area this is independent of selecting a ddifferenty size device in the setup - as this only resizes the canvas - not the elements Matt
PA3GYV - Werner All Messages By This Member #71601 Hi Sourav, did you already managed to get it working in full screen? Having the same 'problem' here.? 73 Werner pa3gyv
Juan Machuca EA7FNJ (IM76) All Messages By This Member #76412 So I supossed it must be an enhanced LCD, it won't work in a basic screen... I've installed the I2C Smeter but there are something wrong because I don't see any signal in the spectrum.
Herman Scheper #76415 开云体育 Here the same problem..... PA0BAB Herman vanaf z'n IPad. toggle quoted message Show quoted text Op 24 feb. 2020 om 22:08 heeft Juan EA7FNJ <ea7fnj@...> het volgende geschreven: So I supossed it must be an enhanced LCD, it won't work in a basic screen... I've installed the I2C Smeter but there are something wrong because I don't see any signal in the spectrum.

Previous Topic Next Topic