Others like myself have wished for a TFT file for the 3.5" Nextion screen that fills the whole space. While there are a few out there, they don't mirror the "original" format that we know and love (CEC version).?

This is a work in progress though it seems to work well enough to share for further tweaking.? I'm no programmer per se though by using some graphic arts thinking, I've put together the attached. There are a few little errors here and there, so, if you know more than I do or have learned something I've not fell over yet, please feel free to add corrections or tell me how to correct it.? For instance: on the page for recalling a memory entry to VFO, there is a button that should say, "READ" (top row, left of the Frequency mask). The active button is there but it's behind the background fill picture, and needs to be brought to the foreground.

This started as the widely-available "3.5" screen file that doesn't fill a 3.5" screen, and was manually increased by 150% on the horizontal axis and by 133.3" on the vertical, picture by picture and block by block, with things shifted around for spacing and fit - and the font sizes increased in most cases.? It pays to be anal-retentive and O.C.D. just sometimes.

Have fun!

Ted
K3RTA

Looks good. I made a few adjustments and fixed the mem screen. I want to run it on my rig before I send it back up. Are you aware of any other errors?

I haven't played with it while actually attached to a radio much, yet (been doing family stuff).? Would you please PM me with your corrected HTM file and let me know how you got the "READ" back on the Mem->VFO screen? It may help me figure out how to attack other parts.

Hi Ted. We actually have a lot of errors to deal with. For the read control, i just deleted it and recreated. There are a lot of sizing issues and a few missed controls. Not too bad...I got tied up on a custom screen for heavier cw controls. I'llget back to this tonight

Here are a few pics of some of the bigger changes.

Nice. Those pages needed fixing, all right.

Thanks, Sam. Now, I have no special attachment to the pictures, as this was someone else's program anyway :)?? I'll put this on a screen and give it some exercise.

The S-meter hasn't been hooked up yet on this build though it will be.? Regarding art design, a tiny mushroom cloud would be a nice touch for signals above +20.

Sam, et al

I'm sure it still needs something; here's the full 3.5 screen with manual freq entry numbers where they belong and a READ button on the "Mem->VFO" page that should work -






Ted

That's excellent! I didn't do anything further. I removed my hmi upload so it could be tested before too many people downloaded it.

Here we are with this again.

An identical screen to the original CEC 2.8" rendition, I finally got around to fixing the Memory-to-VFO and Spectrum/CW Read screens.


ted
k3rta

Many thanks for that,? maybe I can now get the second nano with the spectrum and CW screens working,? is that tft for the enhanced 3.5?? if not can you post the HMI and I can compile accordingly.?

Regards
Ray VK3YNV

Ray, I'm going to muck with that in the coming week. I need to pick up a few nanos.?Please keep us posted with your experiences.

How do, Ray?

That was for the basic 3.5" screen. I've attached an original HMI file and also a compiled TFT for the Enhanced, though I wouldn't blame you a bit for looking it over first.

Best of luck with the capabilities. Comments more than welcomed. It's a learning process on this end.



73,


Ted
K3RTA

开云体育