uBITX 3D case

PeteWK8S #63301 Hi Jim, I used this one?? like you I didn't like one you mention. ?I modified his front panel??moving the top 3 holes for my needs. I moved the encoder hole so I could use a larger knob. The push button and switch holes were drilled. I printed a number of front panels until I got it right. :-) Pete?
Mark M #63308 Here's another nice one (not my design). And a remote head option as well.? I printed the remote head bits but haven't decided where to go from there. I have the uBitX in one of Sunil's cases. I'm thinking of printing a replacement front panel for it, maybe for the remote head or perhaps for a 3.5" display. Or both.? ;) 73...? ? Mark? ?AA7TA
Jim Miller All Messages By This Member #63312 Very nice, thank you so much Pete.? Since he used a modular design, I can modify a front panel I made for my Bitx40 with Fusion360.? I was also thinking of using aluminum foil tape to try and have some sort of RF shielding. Thank you again and 73, Jim AE0BZ toggle quoted message Show quoted text On Tue, Jan 1, 2019 at 2:10 PM PeteWK8S via Groups.Io <pmeier=[email protected]> wrote: Hi Jim, I used this one?? like you I didn't like one you mention.? I modified his front panel??moving the top 3 holes for my needs. I moved the encoder hole so I could use a larger knob. The push button and switch holes were drilled. I printed a number of front panels until I got it right. :-) Pete?

开云体育