¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

4.2" Nextion Bezel? #3d_printing #ubitx-help

 

I am using the 4.2" Nextion?touch screen on my Ubitx. Does anyone know where I can get a small black bezel/frame for it? I only need about 1/4-inch on all sides. Unfortunately, I don't have access to a 3D printer. Thank you for any leads the group may provide.
 

I could probably help but I don't have any black pla to print with. Here in Tucson we have a maker space called xero craft. You may have one where you live. Xero for example has a couple of printers that can be used for a donation. Another option would be to use shapeway or some other site that will print and mail an object for a fee.

Feel free to contact me if you are willing to pay for a spool of filament and I will be happy to do it.

Chris

On Fri, Aug 31, 2018, 8:31 AM David Posthuma <davep@...> wrote:
I am using the 4.2" Nextion?touch screen on my Ubitx. Does anyone know where I can get a small black bezel/frame for it? I only need about 1/4-inch on all sides. Unfortunately, I don't have access to a 3D printer. Thank you for any leads the group may provide.

 

Hi,

I made the bezel for my stock display from a nice piece of scrap wood. You could do the same for your bigger display.

73,

Bill KU8H

On 08/31/2018 11:31 AM, David Posthuma wrote:
I am using the 4.2" Nextion touch screen on my Ubitx. Does anyone know
where I can get a small black bezel/frame for it? I only need about
1/4-inch on all sides. Unfortunately, I don't have access to a 3D
printer. Thank you for any leads the group may provide.
--
bark less - wag more
 

¿ªÔÆÌåÓý

Chris:

?

I would be looking for flat black. The inner dimensions are 4 1/8 inches by 2 11/16. I would be looking for a simple rectangle that is 1/8 inch in thickness and 1/4 inch wide all around. What would this (or a spool) cost???

?

David A Posthuma, WD8PUO

1 (616) 283-7703

?

From: [email protected] <[email protected]> On Behalf Of Christopher Miller
Sent: Friday, August 31, 2018 11:49 AM
To: [email protected]
Subject: Re: [BITX20] 4.2" Nextion Bezel? #3d_printing #ubitx-help

?

I could probably help but I don't have any black pla to print with. Here in Tucson we have a maker space called xero craft. You may have one where you live. Xero for example has a couple of printers that can be used for a donation. Another option would be to use shapeway or some other site that will print and mail an object for a fee.

?

Feel free to contact me if you are willing to pay for a spool of filament and I will be happy to do it.

?

Chris

?

On Fri, Aug 31, 2018, 8:31 AM David Posthuma <davep@...> wrote:

I am using the 4.2" Nextion?touch screen on my Ubitx. Does anyone know where I can get a small black bezel/frame for it? I only need about 1/4-inch on all sides. Unfortunately, I don't have access to a 3D printer. Thank you for any leads the group may provide.

 

I talked to David and am going to laser cut one for him out of acrylic.


On Friday, August 31, 2018 12:21 PM, David Posthuma <davep@...> wrote:


Chris:
?
I would be looking for flat black. The inner dimensions are 4 1/8 inches by 2 11/16. I would be looking for a simple rectangle that is 1/8 inch in thickness and 1/4 inch wide all around. What would this (or a spool) cost???
?
David A Posthuma, WD8PUO
1 (616) 283-7703
?

From: [email protected] <[email protected]> On Behalf Of Christopher Miller
Sent: Friday, August 31, 2018 11:49 AM
To: [email protected]
Subject: Re: [BITX20] 4.2" Nextion Bezel? #3d_printing #ubitx-help
?
I could probably help but I don't have any black pla to print with. Here in Tucson we have a maker space called xero craft. You may have one where you live. Xero for example has a couple of printers that can be used for a donation. Another option would be to use shapeway or some other site that will print and mail an object for a fee.
?
Feel free to contact me if you are willing to pay for a spool of filament and I will be happy to do it.
?
Chris
?
On Fri, Aug 31, 2018, 8:31 AM David Posthuma <davep@...> wrote:
I am using the 4.2" Nextion?touch screen on my Ubitx. Does anyone know where I can get a small black bezel/frame for it? I only need about 1/4-inch on all sides. Unfortunately, I don't have access to a 3D printer. Thank you for any leads the group may provide.


 

¿ªÔÆÌåÓý

Thanks all for responding and being so supportive!

?

David A Posthuma, WD8PUO

1 (616) 283-7703

?

From: [email protected] <[email protected]> On Behalf Of Terence Taylor
Sent: Friday, August 31, 2018 3:50 PM
To: [email protected]
Subject: Re: [BITX20] 4.2" Nextion Bezel? #3d_printing #ubitx-help

?

I talked to David and am going to laser cut one for him out of acrylic.

?

On Friday, August 31, 2018 12:21 PM, David Posthuma <davep@...> wrote:

?

Chris:

?

I would be looking for flat black. The inner dimensions are 4 1/8 inches by 2 11/16. I would be looking for a simple rectangle that is 1/8 inch in thickness and 1/4 inch wide all around. What would this (or a spool) cost???

?

David A Posthuma, WD8PUO

1 (616) 283-7703

?

From: [email protected] <[email protected]> On Behalf Of Christopher Miller
Sent: Friday, August 31, 2018 11:49 AM
To: [email protected]
Subject: Re: [BITX20] 4.2" Nextion Bezel? #3d_printing #ubitx-help

?

I could probably help but I don't have any black pla to print with. Here in Tucson we have a maker space called xero craft. You may have one where you live. Xero for example has a couple of printers that can be used for a donation. Another option would be to use shapeway or some other site that will print and mail an object for a fee.

?

Feel free to contact me if you are willing to pay for a spool of filament and I will be happy to do it.

?

Chris

?

On Fri, Aug 31, 2018, 8:31 AM David Posthuma <davep@...> wrote:

I am using the 4.2" Nextion?touch screen on my Ubitx. Does anyone know where I can get a small black bezel/frame for it? I only need about 1/4-inch on all sides. Unfortunately, I don't have access to a 3D printer. Thank you for any leads the group may provide.

?

1 - 6 of 6