¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

Bitx40 Specifications?

 

?I built my Bit40,? but was looking to find some specifications.? Is there a good list of specifications???? The HF Sigs site has some for the uBitx but missing on the Bitx40.?? For instance what should be the frequency range, bottom to top end???? I wanted to know if it goes to the right limits on both end.? Just some verification before I do any mods.

Thanks
73, KM4OLT
Michael
Gordon Gibby
 

¿ªÔÆÌåÓý


Quick answer: Michael, you can set that frequency range anyway you want. ?It¡¯s been along time since mine was stock, but I think it easily did the 40 m band.

I quickly took information from others and created my own little sketch that allows me to do 80 m as well, made a few hardware changes for that and bought an output low pass filter. ?

Turn it on¡ª-learning starts!

Gordon

On Aug 20, 2018, at 19:56, Michael Monteith via Groups.Io <michael_r_monteith@...> wrote:

?I built my Bit40,? but was looking to find some specifications.? Is there a good list of specifications???? The HF Sigs site has some for the uBitx but missing on the Bitx40.?? For instance what should be the frequency range, bottom to top end???? I wanted to know if it goes to the right limits on both end.? Just some verification before I do any mods.

Thanks
73, KM4OLT
Michael

 

? ? I meant stock.? I went back and fired it up.? It went from a few below 7.05 - 7.5Mhz.? Which makes sense.? That was with Raduino V1.01.? Getting ready to load a newer version.??

Thanks
73, KM4OLT
Michael

1 - 3 of 3