CEC firmware dual display

Richard E Neese All Messages By This Member #48360 on the kd8cec firmware I see it allows for dual display can it be the parallel and a i2c and is there a page on how to enable and setup dual display ?
Ian Lee All Messages By This Member #48539 Richard Please refer to the link below. If you are using an I2C LCD, you can connect another I2C LCD in parallel. Only the I2C address needs to be set differently. You can set Primary LCD and Secondary LCD in uBITX Manager. If you want to change the Primary and Secondary LCD position while using Dual LCD, you only need to set it in uBITX Manager. If you have not yet upgraded the firmware to Version 1.073, please wait a moment.? preparing to release Version 1.075 Beta now. I recommend upgrading to Version 1.075. Ian KD8CEC 2018-05-08 0:17 GMT+09:00 Richard E Neese <kb3vgw@...>: toggle quoted message Show quoted text on the kd8cec firmware I see it allows for dual display can it be the parallel and a i2c and is there a page on how to enable and setup dual display ? -- Best 73 KD8CEC / Ph.D ian lee kd8cec@... (my blog)

开云体育