Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino. How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

开云体育

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP

Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino. How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

-- 
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID  "MotDog@..."
Mike@...

Mike,

Is there code out there for utilizing your RaduinoUMax with an I2C lcd?

I'm running a bunch of jumpers from the Raduino to the lcd and it's a
mess. Running four jumpers would be a lot cleaner installation.

tim ab0wr

On Thu, 8 Mar 2018 10:31:48 -0800
"Michael Hagen" <motdog@...> wrote:

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a
shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP


On 3/8/2018 9:40 AM, kir@... wrote:

Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino.
How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

开云体育

I did it on an old Allard version.? Use the library that is available, and edit the prints to the LCDs.

#include <Wire.h>
#include <LiquidCrystal_I2C.h>

Set up LCD and its I2C address.

LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);

My boards got a dedicated 4 Pin Molex for I2C at 5V.

Find the library and run some examples to get started.

73's Mike

Mike,

Is there code out there for utilizing your RaduinoUMax with an I2C lcd?

I'm running a bunch of jumpers from the Raduino to the lcd and it's a
mess. Running four jumpers would be a lot cleaner installation.

tim ab0wr

On Thu, 8 Mar 2018 10:31:48 -0800
"Michael Hagen" <motdog@...> wrote:

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a 
shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP


On 3/8/2018 9:40 AM, kir@... wrote:

Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino.
How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

-- 
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID  "MotDog@..."
Mike@...

Thanks, Mike.

I just sent you some money for one of your assembled ubitx boards. I
could assemble it myself but I just don't know where to get the time!

tim ab0wr

On Thu, 8 Mar 2018 14:07:47 -0800
"Michael Hagen" <motdog@...> wrote:

I did it on an old Allard version. Use the library that is available,
and edit the prints to the LCDs.

#include <Wire.h>
#include <LiquidCrystal_I2C.h>

Set up LCD and its I2C address.

LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);

My boards got a dedicated 4 Pin Molex for I2C at 5V.

Find the library and run some examples to get started.


73's Mike


On 3/8/2018 1:09 PM, Tim Gorman wrote:

Mike,

Is there code out there for utilizing your RaduinoUMax with an I2C
lcd?

I'm running a bunch of jumpers from the Raduino to the lcd and it's
a mess. Running four jumpers would be a lot cleaner installation.

tim ab0wr

On Thu, 8 Mar 2018 10:31:48 -0800
"Michael Hagen" <motdog@...> wrote:

I have the "Better" Rauinos for BitX and uBit.

I have sold over 50 to folks on this list.

Shipping to foreign countries is usually $15-20. I can give you a
shipping price from the US Post.

Take a look at attached documents.

73's Mike, WA6ISP


On 3/8/2018 9:40 AM, kir@... wrote:

Hi guys,

As I have an old Bitx40 with analog VFO, I would order a Raduino.
How can I do that ? found no info.
I do not have the correct email.

Can you help ?
Tnx and 73's from Felix/ON4KIR

I would like very much to order one of these.
please email me.
I am good on qrz
--
73
clyde
kk4ywi

Hi Mike,

I would like to order an assembled? Raduino UMax. First, can I check whether it is preprogrammed so I can plug in and go? As Nano is extra, does this mean it isn't?

I have the LCD.

73,
Geoff , G8BMI