开云体育

wiring harness bitx40

Richard E Neese All Messages By This Member #42538 anyone know where to get replacement harnesses for the bitx40 ... ?
Jerry Gaffke All Messages By This Member #42542 For uBitx and Bitx40 connectors, google for "KF2510" Originally by Molex, I believe. You will likely be adding the wires, I haven't seen complete harnesses, but then I haven't looked very hard. Here's an old thread:??/g/BITX20/topic/5162271 toggle quoted message Show quoted text On Thu, Feb 22, 2018 at 05:59 pm, Richard E Neese wrote: anyone know where to get replacement harnesses for the bitx40 ... ?
Jim Sheldon All Messages By This Member #42543 How many do you need?? 8 wire?? I have a bunch for the uBITX that I'm not going to use.? I have a goodly handful of 8 wire female plugs with wires already attached, color coded ALMOST like the uBITX.? From left to right, Violet, Blue, Green, Orange, Yellow, White, Red and Black.? I bought them as pairs, wired female and PC mount male (I need most of those but could spare one or two if you need them too). Look me up on QRZ and email me -? I won't hurt your pocketbook too bad. Jim Sheldon, W0EB
Jim Sheldon All Messages By This Member #42544 I have just the 8 pin ones, not the 2 and 3 pin.? I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere.? I mainly need the male PC board mount ones so the 8 wire females (already cabled) are mostly surplus.? W0EB
Michael Hagen All Messages By This Member #42545 开云体育 Don't Forget Tayda for all Molex style connectors and pins and headers! What a deal they have! Mike, WA6ISP On 2/22/2018 6:53 PM, Jim Sheldon wrote: I have just the 8 pin ones, not the 2 and 3 pin.? I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere.? I mainly need the male PC board mount ones so the 8 wire females (already cabled) are mostly surplus.? W0EB -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@...
Jim Sheldon All Messages By This Member #42546 They were actually out of them when I ordered these. ?It usually takes me just as long (longer sometimes) to get stuff from Tayda as it does out of Hong Kong or Mainland China and it's the same exact stuff. ?I actually get it cheaper off of eBay. ?But then you must work for Tayda as much as you plug them - LOL. Jim? toggle quoted message Show quoted text ------ Original Message ------ From: "Michael Hagen" <motdog@...> To: [email protected] Sent: 2/22/2018 9:10:30 PM Subject: Re: [BITX20] wiring harness bitx40 Don't Forget Tayda for all Molex style connectors and pins and headers! What a deal they have! Mike, WA6ISP On 2/22/2018 6:53 PM, Jim Sheldon wrote: I have just the 8 pin ones, not the 2 and 3 pin.? I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere.? I mainly need the male PC board mount ones so the 8 wire females (already cabled) are mostly surplus.? W0EB -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@...
Michael Hagen All Messages By This Member #42547 开云体育 Sorry...... That's not the Tayda I have ordered from? I have never had Tayda take over? a week?? And yes they also sell on eBay with Free Shipping. But the eBay prices from Tayda are more than ordering direct. So have you had Long delivery time? I have no investment in them! Mike, WA6ISP On 2/22/2018 7:14 PM, Jim Sheldon wrote: They were actually out of them when I ordered these. ?It usually takes me just as long (longer sometimes) to get stuff from Tayda as it does out of Hong Kong or Mainland China and it's the same exact stuff. ?I actually get it cheaper off of eBay. ?But then you must work for Tayda as much as you plug them - LOL. Jim? ------ Original Message ------ From: "Michael Hagen" <motdog@...> To: [email protected] Sent: 2/22/2018 9:10:30 PM Subject: Re: [BITX20] wiring harness bitx40 Don't Forget Tayda for all Molex style connectors and pins and headers! What a deal they have! Mike, WA6ISP On 2/22/2018 6:53 PM, Jim Sheldon wrote: I have just the 8 pin ones, not the 2 and 3 pin.? I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere.? I mainly need the male PC board mount ones so the 8 wire females (already cabled) are mostly surplus.? W0EB -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@... -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@...
Jim Sheldon All Messages By This Member #42548 开云体育 I've always had long delivery times from them and their on site search shows no KF2510 connectors even now. ?If they have them, I can't find them. Jim toggle quoted message Show quoted text On Feb 22, 2018, at 9:24 PM, Michael Hagen <motdog@...> wrote: Sorry...... That's not the Tayda I have ordered from? I have never had Tayda take over? a week?? And yes they also sell on eBay with Free Shipping. But the eBay prices from Tayda are more than ordering direct. So have you had Long delivery time? I have no investment in them! Mike, WA6ISP On 2/22/2018 7:14 PM, Jim Sheldon wrote: They were actually out of them when I ordered these. ?It usually takes me just as long (longer sometimes) to get stuff from Tayda as it does out of Hong Kong or Mainland China and it's the same exact stuff. ?I actually get it cheaper off of eBay. ?But then you must work for Tayda as much as you plug them - LOL. Jim? ------ Original Message ------ From: "Michael Hagen" <motdog@...> To: [email protected] Sent: 2/22/2018 9:10:30 PM Subject: Re: [BITX20] wiring harness bitx40 Don't Forget Tayda for all Molex style connectors and pins and headers! What a deal they have! Mike, WA6ISP On 2/22/2018 6:53 PM, Jim Sheldon wrote: I have just the 8 pin ones, not the 2 and 3 pin.? I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere.? I mainly need the male PC board mount ones so the 8 wire females (already cabled) are mostly surplus.? W0EB -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@... -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@...
Jack Purdum #42549 I kinda have to agree with Mike. I've bought a lot of stuff from them and it's usually here within a week and their prices are really good. I do know they have a distribution facility in Livingston, CO, which is why most of their stuff arrives quickly. You may have ordered an item which was out of stock, which they fly in from Thailand (I think ?). Jack, W8TEE toggle quoted message Show quoted text From: Jim Sheldon <w0eb@...> To: [email protected] Sent: Thursday, February 22, 2018 10:14 PM Subject: Re: [BITX20] wiring harness bitx40 They were actually out of them when I ordered these. ?It usually takes me just as long (longer sometimes) to get stuff from Tayda as it does out of Hong Kong or Mainland China and it's the same exact stuff. ?I actually get it cheaper off of eBay. ?But then you must work for Tayda as much as you plug them - LOL. Jim? ------ Original Message ------ From: "Michael Hagen" <motdog@...> To: [email protected] Sent: 2/22/2018 9:10:30 PM Subject: Re: [BITX20] wiring harness bitx40 Don't Forget Tayda for all Molex style connectors and pins and headers! What a deal they have! Mike, WA6ISP On 2/22/2018 6:53 PM, Jim Sheldon wrote: I have just the 8 pin ones, not the 2 and 3 pin.? I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere.? I mainly need the male PC board mount ones so the 8 wire females (already cabled) are mostly surplus.? W0EB -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@...
Karl Heinz Kremer, K5KHK All Messages By This Member #42550 开云体育 I usually get my orders within a week. For the connectors, you need to look for the 2500 series wafer connectors: Karl Heinz Kremer PDF Acrobatics Without a Net? PDF Software Development, Training and More...? ? toggle quoted message Show quoted text On Feb 22, 2018, at 10:29 PM, Jim Sheldon <w0eb@...> wrote: I've always had long delivery times from them and their on site search shows no KF2510 connectors even now. ?If they have them, I can't find them. Jim On Feb 22, 2018, at 9:24 PM, Michael Hagen <motdog@...> wrote: Sorry...... That's not the Tayda I have ordered from? I have never had Tayda take over? a week?? And yes they also sell on eBay with Free Shipping. But the eBay prices from Tayda are more than ordering direct. So have you had Long delivery time? I have no investment in them! Mike, WA6ISP On 2/22/2018 7:14 PM, Jim Sheldon wrote: They were actually out of them when I ordered these. ?It usually takes me just as long (longer sometimes) to get stuff from Tayda as it does out of Hong Kong or Mainland China and it's the same exact stuff. ?I actually get it cheaper off of eBay. ?But then you must work for Tayda as much as you plug them - LOL. Jim? ------ Original Message ------ From: "Michael Hagen" <motdog@...> To: [email protected] Sent: 2/22/2018 9:10:30 PM Subject: Re: [BITX20] wiring harness bitx40 Don't Forget Tayda for all Molex style connectors and pins and headers! What a deal they have! Mike, WA6ISP On 2/22/2018 6:53 PM, Jim Sheldon wrote: I have just the 8 pin ones, not the 2 and 3 pin.? I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere.? I mainly need the male PC board mount ones so the 8 wire females (already cabled) are mostly surplus.? W0EB -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@... -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@... -- Karl Heinz - K5KHK
Vince Vielhaber #42557 The only time it has ever taken more than a week to get a Tayda order is when the USPS misplaced it in Denver. Someone must really dislike you! Vince. toggle quoted message Show quoted text On 02/22/2018 10:14 PM, Jim Sheldon wrote: They were actually out of them when I ordered these. It usually takes me just as long (longer sometimes) to get stuff from Tayda as it does out of Hong Kong or Mainland China and it's the same exact stuff. I actually get it cheaper off of eBay. But then you must work for Tayda as much as you plug them - LOL. Jim ------ Original Message ------ From: "Michael Hagen" <motdog@... <mailto:motdog@...>> To: [email protected] <mailto:[email protected]> Sent: 2/22/2018 9:10:30 PM Subject: Re: [BITX20] wiring harness bitx40 Don't Forget Tayda for all Molex style connectors and pins and headers! What a deal they have! Mike, WA6ISP On 2/22/2018 6:53 PM, Jim Sheldon wrote: I have just the 8 pin ones, not the 2 and 3 pin. I bought them in male/female sets out of Hong Kong off eBay as they were cheap enough and the only place I could find them in stock anywhere. I mainly need the male PC board mount ones so the 8 wire females (already cabled) are mostly surplus. W0EB -- Mike Hagen, WA6ISP 10917 Bryant Street Yucaipa, Ca. 92399 (909) 918-0058 PayPal ID "MotDog@..." Mike@... -- Michigan VHF Corp.
Jerry Gaffke All Messages By This Member #42567 For some reason, Tayda calls them "Serie 2500", not "KF2510".? Unfortunate as there is a 2500 family of connectors from 3M which is considerably different. Jerry toggle quoted message Show quoted text On Thu, Feb 22, 2018 at 07:29 pm, Jim Sheldon wrote: I've always had long delivery times from them and their on site search shows no KF2510 connectors even now. ?If they have them, I can't find them. Jim

Previous Topic Next Topic