¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

Help with Bitx20

 

I have a Bitx20 which was built from a Hendricks kit it is the 10 watt version. At the moment it tunes from 14150 to 14300. I would like to try and use it for POTA and SOTA, but most of that action tends to take place between 14300 to 14350. My question is there an easy way to move the coverage to 14200 to 14350. I asked on another forum and they seemed to think that I would have to change several components to move the coverage. I am not very good with the soldering iron.
thanks Nigel G7luo
 

If you removed a turn from the vfo, it should work...


On Mon, Feb 12, 2024, 10:20 PM Nigel G7luo via <m0dbo=[email protected]> wrote:
I have a Bitx20 which was built from a Hendricks kit it is the 10 watt version. At the moment it tunes from 14150 to 14300. I would like to try and use it for POTA and SOTA, but most of that action tends to take place between 14300 to 14350. My question is there an easy way to move the coverage to 14200 to 14350. I asked on another forum and they seemed to think that I would have to change several components to move the coverage. I am not very good with the soldering iron.
thanks Nigel G7luo
 

Thanks for the reply.


On Mon, 12 Feb 2024 at 18:28, Ashhar Farhan
<farhanbox@...> wrote:
If you removed a turn from the vfo, it should work...

On Mon, Feb 12, 2024, 10:20 PM Nigel G7luo via <m0dbo=[email protected]> wrote:
I have a Bitx20 which was built from a Hendricks kit it is the 10 watt version. At the moment it tunes from 14150 to 14300. I would like to try and use it for POTA and SOTA, but most of that action tends to take place between 14300 to 14350. My question is there an easy way to move the coverage to 14200 to 14350. I asked on another forum and they seemed to think that I would have to change several components to move the coverage. I am not very good with the soldering iron.
thanks Nigel G7luo

1 - 3 of 3