开云体育

I found a forum discussion between Joe K1JT and Bill G4WJS about the composite call sign.
Things are still flexible here, but if you read it, you'll probably understand more than I do.
I hope it leads you a little closer to the solution.
They exchanged "".

--
Gyula HA3HZ

The current (v3.02) log program does not accept the / sign, therefore, none of the forms of occasional stations that are located outside can be entered.
The call sign displayed in the reception window is displayed in the form <...>.
If it is shorter, you can see it, but during the QSO it happens that it simply disappears and the entry <...> remains in the log file.
My example today is that the program entered the / sign.
When I wanted to note with the editor that no cfm had occurred, i.e. the R-xx report was not acknowledged, the / sign disappeared from then on.

I could tell you to bring POTA, SOTA, so go out into the field with this device, which cannot give your occasional call sign.
But I don't because I want it to work well.
I'm not a coder and I'm not a good English speaker, as google translator helps with the translation.
But I am looking for an opportunity to help someone who can code.
I would appreciate any help.
--
Gyula HA3HZ