开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. BITX20
  2. Topics

No receive audio from antenna, Bitx40 #bitx40

[email protected]
 

Bitx40 no receive audio at all when attached to an antenna or on a dummy load.? I have a speaker and headphone jack wired.? Baofeng mic and ptt are on separate 3.5 mm jack. VFO changes frequencies, Power comes on and appears to work as expected.? I have a 10 turn pot and made the modifications for tuning range within the options field.? Is there a description of basic troubleshooting with a multi-meter to test what continuity or amps should be present at certain points on the board or another way to narrow down the problem?
KC9SGV
 

开云体育

Hi Lisa,
Here....

Bernie,
KC9SGV


On Feb 5, 2018, at 3:02 PM, Lisa.beasley42@... wrote:

Bitx40 no receive audio at all when attached to an antenna or on a dummy load.? I have a speaker and headphone jack wired.? Baofeng mic and ptt are on separate 3.5 mm jack. VFO changes frequencies, Power comes on and appears to work as expected.? I have a 10 turn pot and made the modifications for tuning range within the options field.? Is there a description of basic troubleshooting with a multi-meter to test what continuity or amps should be present at certain points on the board or another way to narrow down the problem?

[email protected]
 

After checking the voltage on Qx inputs, I discovered that the radio is in transmit mode.? It went to receive with sound when I pull the PTT connector wires.? The mic/ptt is wired wrong.? Time to review and perhaps start from scratch on that part.

1 - 3 of 3