开云体育

After running a small business for some time there is one thing I have learned, no matter how good you are there are going to be people that just simply hate your product. Even the most expensive

If this has already been answered, please just tell me to go back and search again. I have a big rectifier diode across the power input pins with fuses in both lines. I hope to make time this

A lot of this discussion about this rig depends upon your point of view. Andrew has taken a wise approach, in that he knows up front what's involved with the rig. Agreed, many don't, but whose fault

Just to balance. I'm a new ham, not even licensed yet but gathering my equipment slowly in readiness. I spent ages researching what to get after realising that 2m is pretty dead around here and HF is

Ha ha. I thought I was the only one...but I didn't tell anyone until now. Yes intuitively the printing on the display misled us. Luckily I had room to flip it mechanically. I just changed to a blue

Randy. Third from the Bottom. My call is KG7UMN and thank you for maintaining the List. Thanks John. Sent: Wednesday, April 05, 2017 7:21 AM To: [email protected] Subject: Re: [BITX20] Quick turn

I also agree that this board is the coolest makers radio I have seen. This group is awesome and the price point allows for you have fun on a small budget and use up some of those parts in the box on

Ken Corrected, thanks Randy

Ok here it is

Hi Randy At the top of your list V3ABN should be VA3ABN 73 Ken VA3ABN

Hi Below is my updated delivery list. Thanks to all that have posted their information. We should start seeing the 4th batch of serial numbers soon. 73 Randy, K7AGE BITX40 Deliveries – Randy,

It's facing you, the pic that I have has a central circle that tells me it is the shaft facing me.

Larry, it sounds like it's time for you to move on to your next project. Roy WA0YMH

I absolutely agree with you! BITX40 got me out of the hermitage and I am having fun with the ready made boards.

Thanks to all that commented. First- I DO NOT expect it to work like any commercial rig. I am shocked that someone would think I'm expecting more than it is. I've been a ham for 50 years, Home brewed

I think this is amazing, how many people are actually getting into the nuts and bolts of these dandy little radios. ?In these days of appliance operators, this I find a huge breath of fresh air!

Just reposition the LCD with new holes. Fillup the old holes with some putty and everything is OK! Cheers Raj

I also put in the LCD upside down, misled by the printing on the PCB. Unfortunately I'd already cut the box and there was no way I could turn it around and still fit it in the same box.? I had two

I had two QSOs last night with my newly constructed BitX40. One was 1860 miles (South Texas to Washington state)! Conditions weren't great but he could pull me out of the noise. My first Qs with this

Find an SDR near you (I use sdr.hu) and look for strong signals on 40m and then see if you can go hear it. It helps me a lot. -- Ryan Flowers KC7RYS? miscdotgeek.com ( http://miscdotgeek.com