开云体育

We have several graphs of the filters and the equalizer. For example: Specifically what are you looking for? Jack, W8TEE

Hi Daniel: No, I haven't. One reason is because I have tried to keep all function prototypes, globals, and symbolic constants in one place. When you eventually see that header file, you will also find

Jack, Have you considered directly provisioning for this by making an "empty" extensions header/code file, perhaps named MyExtensions.h & MyExtensions.cpp, and including these files in the framework.

Outstanding.? Will comply. At what sample rate is the processing done? Do you have a jpg of the audio graph in the deliverable? ...so I can get a head start :-)

0.25" polyethylene pressure tubing is ~4mm ID.? Cut a short piece to make an insert for your 0.25" knob and drill a hole for the set screw.? -Paul? K9MV

I hit this problem last night. The difference between 6 mm and 0.25" is only 0.014". I had a piece of 7 mil copper foil. I rolled it out flat then cut a tiny shim rectangle. I wrapped that around the

Some displays might be configured to work with the SPI interface, too. Jack, W8TEE

All: In my long email, I have: ?? callDone = void MySlickFeature(int whichButton, int whichDisplayPage);?? // ERROR!! and it should be something like: ?? callDone = MySlickFeature(myButton,

No mention of "fuse" here:??http://www.hfsignals.com/index.php/ubitx-wire-up/ What looks like a fuse at the top left of the schematic is labeled "ON/OFF", so I take that to be the power switch on

Are the filters/equalizer/etc. compatible (as blocks) with that Teensy visual system audio library they have? All: JackAl uses the audio board and its library, so, yes, very much so. Please note:

Tom I appreciate your effort. I received a question about MAC from a number of users. But I did not have a MAC and it was difficult to test. Your test has helped me a lot. Thank you Ian KD8CEC

Ashhar Farhan First of all, congratulations on recent things. You did a hard job in a busy schedule. I have confirmed that you have maintained the existing code and have at least a few modifications.

I had some M3 Nylon Standoffs and drilled a hole through it so It just slid over the shaft.? I put a drop of super glue in from the end and rounded the corners with a dremel a little. -- Lee -

I am interested in this too. I have not received ?my ubitx yet but have been playing around with the Arduino and stm. I've ?not had much luck with stm ?f303k8 ?nucleo , mostly because like it has

5Pcs Ribbed Grip 4mm Split Shaft Potentiometer Control Knobs Black (

Agreed. Great work. Mine will have that plexiglass panel. Makes the display pop. All kinds of gamer pc lighting possibilities. And the visual “works” very Mr. Machine-like. Are the

My present layout (on the screen now) extends the Raduino width about an inch or so to the right (inside). The Pill board is set in toward the left about 1.5", leaving room on the right for a very

Allison and all, with the KD8CEC firmware you can opt for a I2C display connection; the display can be remote quite some distance with just 2 wires (plus power and ground). Rod KM6SN

The problem is everyone wants a simple swap this part a poof its wonderful. Applying a simple fix to only one stage is not going to achieve that. The IRF510 has been used to ge high power it can with

2n2222a. Surface mount or metal can version?