开云体育

What no 17 meters? I heard some signals the other day coming in and they may have been from Japan. I’m keeping an eye on 17 this summer. 15 meters too. ? I already looked Poland and Brazil on 15.

Like Bob Heil said. If everybody TRANSMITTED on 10m, then you may hear someone. <sic>. Kent Sent: Thursday, May 31, 2018 6:01 PM To: [email protected] Subject: Re: [BITX20] boosting the power on 28 MHz

More from the thinkery, Mike: TP20 should give a good meter point. There's a 0.1uF to earth there, but at low freq and Z its Z won't affect much. ..and theoretical, 'cos I don't actually have one:

The actual assembly is the same so just follow the wire up link at hfsignals.?http://www.hfsignals.com/index.php/ubitx-wire-up/

Thanks for the replies . . .?I figured they were meant to be options. May be better just to provide a text-box footnote in?schematic. I've made dozens of FT8 contacts with a scratch built ubitx(V3)

My archived copy is here. ubitx wiring <http://w7hd.ddns.net/bitx/wireup.pdf> Ron W7HD -- Ron W7HD - NAQCC#7587 OMISS#9898 KX3#6966 LinuxUser#415320 Editor OVARC newsletter

Ian, correct me if I am wrong, is saying use the serial port to send FT-817 commands to control the uBITX. rOn

I put a 10 mF cap across C51, which is 1 mF. ?To me, it sounds better on SSB.

OK, I thought about this can of worms I opened on the ride home. Given the stores are 60 miles from the mountain top home I am staying at this summer I had roughly 45 minutes to sort through the

This looks great to see progress for ubitx and nextion integration. I am looking at purchasing: Nextion Enhanced 3.2" HMI Touch display Product Code : RB-Ite-174 Would this work ok for working with

I'm wondering if a multimeter on the (non-decoupled) audio might show it better. Measure AC, then DC. AC will register level down to say 10, maybe 5Hz, and DC (particularly analog-needle) will show

It's all due to marketing! 10 meters is called the "Magic Band". And everybody loves magic. - Rich WB2GXM

I like as mine came from the factory. Indeed it has no basses. Also the tx audio sounds the same. In my unit frequencies below 700hz are cut down. Above 2.8khz are also cut. The filter seems to me

To learn about the software you may want to get one of the nano processors and a display, and maybe one of the rotary encoders. They are not very expensive, only about 2 or 3 dollars shipped from

*The archived assembly instructions are here: http://www.hfsignals.com/index.php/ubitx-r3-archived/ <http://www.hfsignals.com/index.php/ubitx-r3-archived/> * I can't find any assembly instructions

Most of the talk here about mods has been with regard to getting more power out on the upper bands, Works, but only a watt or so on 10m. If your interest is 80m and 40m,? you can ignore all that

The archived assembly instructions are here:??http://www.hfsignals.com/index.php/ubitx-r3-archived/ They were updated and should be accurate.? The only issue you may have that you should take care

Thank you.

OK, that makes sense. I am reading the comments between shopping stops. I really had not looked at it, initially, beyond superficially and was kind of just spitting out an intuitive thought. I find