开云体育

Well, one difference is the 5" BuyDisplay is $34 versus $65 for the Nextion. The 7" Nextion is $75 versus $44 for the BuyDisplay we use. Jack, W8TEE

On 7.277? Don't hear a thing hear in Irvington NY

Just made contact with Stan, WS4JM! Good contact! New York to Tennessee . Dan W2DLC

The band is coming alive! give a call! W2DLC Dan

Heard the buzz, but nothing else here in NY WB2VXW

I've been told that the buzz is a Chinese over-the-horizon radar system. I hear it here (NJ) sometimes.? -- John - WA2FZW

Hi Daniel, Using RIT with the CEC firmware sounds like an interesting solution. (With the transmit frequency shown on the dial) Tom, wb6b

Thanks, Allison. The 2n5179 is actually a 12v part for Vceo. Since I run a 12v regulator to power the mainboard I'm not too worried about exceeding this. Next time I pull the mainboard I may stick two

Just to be safe, I mounted my irf510s (isolated) to the case.? In 2 months, I've had over 500 FT8 QSOs with no problems. Tom AB7WT

John: I use a Raduino as a VFO for my 4SQRP ZZRX-40 DC receiver. Works very well. I am using a modified version of Allard's v1.26 software used on the Bitx40. Made a few changes to tune 7.000 to

Had a QSO with Jerry in Iowa, Heard another 0 station, but could not get back to him. Does anyone else here the "buzz" that repeats every 8 minutes? WS4JM

Hi Dave, The CEC firmware does not totally "fix" the issue, but if you use the uBITX Manager software software it can change the CW frequency display to the transmit frequency. Just kind of moves the

Yeah Tom, I'm using CEC firmware because it solved my problem with the paddle on the original firmware, now it just works perfectly (well, the paddle...). Not to mention all the new features. Dave,

Thanks Allison, Did a Google search as well, found many manufacturers for the 70MHz, or about, frequency, one even here in Greece (

I looked to see what purchasable. Fox 70mhz 15khz 35$ each... compared to the more common 45mhz from the same source at 6.35$? indicated relative cost.? I'm sure they can be had cheaper. That is

same here....nothing on the whole band. don

Nuttin but noisze here, and a lot of it! Anyone else on? -- John - WA2FZW

Its not a drop in.? The filter would likely be hard to find and costly or for a one off salvage from? an old junker commercial radio.? I think Kenwood radios used a 63mhz filter or maybe ICOM.? so

Another set of eyes on this, and I concur with Howard.? I didn't see anything obvious that would have caused damage to the Radunio/Nano where TX works and RX is not working. I would imagine that this