开云体育

I don't think the source files for the latest CEC firmware have been released yet. I may still have an earlier version. I think the chip you mentioned is a mega2560. If so I could send a hex file of

Hello Group and developpers I’m sorry for my bad English, but I have one question about firmware of raduino to use with a nextion display, on site I have access to Hex file, it’s right, but I plan

The uBitx uses a clone nano and the serial/USB chipset CH340. In Windoze 10, open Device manager and right click the unusable/unwanted Parallel port LPT3 and delete it. Download the CH340 USB serial

FTDI drivers were enforced by windows10, and had features designed to either refuse to use, or even adversely reprogram counterfeit versions of FTDI hardware..... and thus prolific stuff seems to have

I am now puzzled. Which gives more output? A mic with sensitivity - 24db or one at - 44db (as mine which still give some less output than the stock element)? Il 13/lug/2018 23:05, "k1yw via Groups.Io"

Try something under the maximum value 50000 should work and be almost as good as a fast way of getting around? i presume you know about Gen Coverage mode? Go to band change and hold down the switch

I switched to using Parallax USB to Serial RS-232 adapters after having problems with ones from Prolific! Started having problems with Prolific adapters when I switched to Windows 10.

I think Jack got it. The way Ian coded it you can't save that large of a value. It would probably be a good idea if there was some error checking in the uBitX Manager program where it wouldn't let you

Or you could punt, and manually store the freqs for WWV in the memory channels available in the KC8CEC 1.08 software ... I did that - it's arguably easier than dial twiddling, hi. Sorry if this is no

Jerry - as the original "not stupid" guy, thank you VERY much for the detailed analysis of a mainboard w/o raduino. ? This is kit has been so much fun to build. I've loved every minute of it.? The

Jerry, Very much appreciated for your detailed explanations. // hiro, JJ1FXF 2018/07/15 3:18、Jerry Gaffke via Groups.Io <jgaffke@...>のメール:

I think it’s FTDI that windows likes.

Yes, it is KC8CEC 1.08.?? Changing those values does change my step size but the 100000 displays funny while setting it or using it. -- Lee - N9LO?"I Void Warranties"

Lee Are you editing KD8CEC sketch?? If so, this won't achieve what you want.? These values are only the initial values when the programme first runs.? They won't apply once values have been saved

Is something missing???? -- Lee - N9LO?"I Void Warranties"

Sometimes if you are not using a Profilic (probably spelled way wrong) original driver but a 3 rd party driver, you have to delete the driver and install the 3rd party driver. This seems to happen to

Hello Derek, I firstly fitted the normal lcd display so the hole was cut for that the 2.4 screen just covers the hole I am mounting mine on the front panel with small standoffs.I am also running a

I am not an expert but try unplugging the device then back in and also check device manager to see-if the device is active Tom Sent from my iPad Tom Martin

A few days ago my Windows 10 installation got updated, without asking me, of course.? I stepped away from the computer for a while and when I came back updates were being installed. I think my USB

A signed int on a Nano is a 2-byte number. Because the Most Significant Bit (MSB) is the sign bit, you only have 2^15 = 32,767 Anything after that sets the sign bit and appears as a negative number. I