开云体育

Where is information available on W0PM's ALC/AVC board and instructions? Thanks, Don W5MMJ

I understand your frustration but it seems like the issue is with the pi image and not the hardware. You need to find the missing sbitx directory or failing that get another SD card and install a new

Nice up dates! Joe VE1BWV [email protected]> wrote:

I recently purchased a small PC board from John, W0PM, on eBay for 13 dollars.? There is a set of instructions with it which specify the parts needed.? I had the parts needed in my junk box except

I haven't checked myself yet, but you might want to take a look at Krita. It was low overhead and portable last time I looked. I think it's open source, and you might be able to build it for the Pi of

I have updated the FreeDV_PTT application and it now supports 700C, 700D, and 700E as well as "reliabletext" which is the component it uses to transmit your callsign to FreeDV-GUI users. In the

Just tried it just says no such file or directory

Yes the SD card that came with it I'll give your suggestion a try

Are you using the included SD card that came with the rig? You should launch the terminal, change to the sbitx directory (cd sbitx) and enter ./update to update the files and rebuild sbitx. -- Hank

Still trying to get this going got to power it up twice second time I got this message have tried everything I know and Several others suggestions all I have is wifi no access to a normal

Copy the attached file to the desktop on your sBitx -JJ

Please ensure that you are using RC1 https://drive.google.com/file/d/1JM5eK6kt7jR8x2QTNa-XB0dvESmU4qHm/view This will fix many of the issues you are

Ahh it just occurred to me.. The image you are using is very old. We are at RC1 right now.. https://drive.google.com/file/d/1JM5eK6kt7jR8x2QTNa-XB0dvESmU4qHm/view This will fix many of the issues you

Thanks for your notes on VNC, JJ. I have VNC on my station computer that is a Pi so I can control my station remotely. It's ironic that "Real VNC" is withdrawing their free VNC for a paid one. But, of

How do you go about resetting the radio back to New settings

JJ, I have every intention of giving you every symptom of good and bad behavior. I appreciate your efforts, I want you to succeed for all of us, and I am keeping notes and taking screen snaps as

Consumption 4mA per order

In practice, I use a module like the one in the photo with separation on the optocoupler and the command from the Q9 output

I did the same thing, installed the excellent 64bit enhanced V3 image, it ran fine. Updated the linux (146 updates) then sbitx would no longer start. Here's what happens when we try

Ok thanks for sending that. Something in wiringPi was overwritten or a function is missing. You can try this in terminal to resolve the issues. *cd $HOME* *sudo rm -rf WiringPi/* *cd $HOME* *git