开云体育

Hi? All! To be tested: all band mBITX, 40-ty m. band, R110 -150 Om, C 68-75 pF parallel BAT54SL (points 2-4 of the transformer, carrier from -26 dB moved down to -40. PA output is 10 W on this

Hi Gordon, If you order boards again I would be interested in buying two for my 2 uBItx kits. Thanks, Bob KM2Q

Hallo thank you for your answer ? In the last of my written thread, "shortet in raduino...) i have post in the forum, you write to me some things... ? About this things you have written with the

Those boards are really neat Nick, what size SMD parts is this setup for? Skip Davis, NC9O

Shortly after I worked him, another CT9 call (I didn't write it down) was being used so I suspect he was operating from a local ham station somewhere on Madeira. I don't think it was a DXpedition,

Interesting. I will be visiting Madeira for a week between 15/10 and 22/10. I wonder if he will still be active.

Very good! Although I am sort of distracted right now, I made several WINLINKconnections with the uBitx and a nonresonant sloper dipole with a tuner. It’s not a lot of power, so you have to choose

And so it begins. These are my SMD proto/scratch built boards. 100mm X 100mm cost was $8 for 10, posted, I am pretty happy how they turned out. 73 Nick VK4PP.

Carefully measured results were published on this forum. Construction: https://qsl.net/nf4rc/2018/OutboardRelaysDesignDocumentTry3.pdf

A thought that might help, Gordon, though you seem to have this anyway: Treat the filters like fire hoses. Taps to turn one to pass at a time, others blocked to stop leakage, and simultaneous in and

Gordon Gibby seems to have it licked - and inexpensively! Any before/after measured results for comparison, Gordon? 73 Dex, ZL2DEX.

Thanks for all the input.? I'm trying to keep this simple....but I also want it to work. So this weekend I'll get it switched on both sides and figure out how to ground the unused filter while I'm at

In the simple little design that I did to move one side of the relays off the board, I grounded un-used filters Gordon

I certainly agree with that, Lawrence. It's called Port to Port isolation and you want to keep it as high as possible to be as effective as possible as a filter. Another point, I was using DPDT relays

Curt Nice work, yes enjoy the rig to decide what if anything it needs. Curious what type of microphone you have mated with it? Here in Maryland about 20 of us are preparing for a group build as nice

For the record, here's what I have running winlink - BitX40, stock 5W more or less Pac Ant 20/40 trap dipole, inverted Vee on broken sailboard mast Surface Pro/WIN10 Winlink Express 1.5.14.2 WINMOR on

It's working!? An RMS in Reno 563 km away took my call and forwarded my email.? What I've done since posting my request in March was, switch to USB via Allard's sketch as you all recommended and

Nice work Curt Joe

From Rtl-sdr.com Joe

Joe, Maybe I missed it, but where did you get your BCI filter board? 73, Carl, K0MWC