开云体育

Hi please tell us the price in USD so I can pay. It looks like one board is going to cost me around 10 usd perhaps I'm wrong but sounds about right. Then whatever shipping costs. wrote:

Hello Mike , try Hirschman products : german quality . https://www.newark.com/hirschmann-testmeasurement/930317801/alligator-clip-4mm-red-8a/dp/97K4292 73 HB9EFN Georges

hi James, I do not know of a firmware version that has an S meter function and works with the stock v6 display.? The CEC versions work with either a character display like the original 16x2 display

If the S-meter code was written for the Nextion, yes, you will need to alter the code. To me, the Nextion has a weird way of displaying things, requiring the use of their editor. Perhaps the good

Sorry for the maybe naive question but here it is. i have the uBitx v6 if i wanted to change the firmware to one that maybe compatible with a s-meter do i need to change the tft screen that came with

You might? also look for "battery clips".? I have found some of these to be a bit better, although they are bigger (and a bit more expensive). Sent by the Thunderbird

Looking for the best?... Mueller https://www.muellerelectric.com/products/category/Clips

Many places sell similar items. Just do a Google search for "alligator Clips" to see what is available in different configurations. Arv _._

Arv and the rest.? Thanks for the responses.? Do you know if you can get them with schrod and wired?

Sometimes we are our own worst enemy. When you go for the least expensive parts, sometimes you get just what you pay for...cheap parts, poor performance, and so on. Alligator clips (crocodile clips

DROK clip leads. Best I have found. On Amazon. Quality clips, silicone- insulated wires, SOLDERED on. - Jerry KF6VB

Wow, that WORKED the first time!? Thanks to the wonderful support from my new host, the move was pretty much painless.? Login to the new site is still www.w0eb.com ( http://www.w0eb.com ) (do not

I agree,a lot of alligator clips for the low current circuit voltage type are very flimsy and tend to twist.I happened across some better quality ones at a UK radio rally and bought loads and made my

Fellows builders.? This might seem trivial but bear with me.? I cannot find a source of GOOD alligator clips.? I have purchased new clips in bundles of 10 at ham shows, etc.? When pinched they

Hi folks, The TSW Website ( https://www.w0eb.com ) will be down for a few days while migrating the site to a new server. It was originally hosted for free by a friend of mine on his personal server,

Hi Ramon, Did you place an order for the boards ? Best regards, Peter.

Thank you, thank you. That did the trick! Stephen

ALL the .ino files need to be moved into the folder you created.

After successfully uploading Reed's R1.5.1 firmware onto a uBITX v6 several times, I attempted to upload the Factory v5 firmware to a Nano (standalone) for later installation in a friend's v5 that is