开云体育

Neither does the Teensy, but they emulate it. No such thing on the RP? Jack, W8TEE

RPI does not have an EEPROM. OS and userdats is stored on the boot-device (SD-card in most setups). 73 de oz9ny, Niels

Farhan: Bear in mind that I've not played with the RP much, but why not add a button that reads a default setup from EEPROM?? Jack, W8TEE

I think it should be renamed default_settings.ini So if it gets garbled, you can copy it back. Frequently, I have changed settings (like turning on the rit) and wondered why the radio was misbehaving.

Hi Ashhar, Is there any chance you can share a price list for various sBITX options?? I'll wager you guys are still finalizing elements of this list but an approximation of pricing would be very

Hi Ashar The update procedure fails if callsign and location is changed from defaults, And the sbitx (without extensions) file should be removed from github. 73 de oz9ny, Niels

Great job, Justin!? Congratulations!? QRP is fun!? A few months ago I finally completed my WAS via QRP, all with the ubitx.? It took a few years and multiple versions of the ubitx (v3 to v6), but

Evan, I have done the calibration using the TCXO. Now both on USB or LSB i can hear the TCXO if I tune slightly (few 10ths of Hz) away from TCXO center frequency 20MHz. Also I am able to receive the

Thank you. I will roll it in

A couple of images which may be useful - added label for the 3 jacks and a picture of the power jack (worth a 1K words?).

Not sure what I did, but now working as it should. Tim N7LVB

Trying to set up wsjt-x on a raspberry pi 4 and ran into the same problem again. I’m using a Sabrent usb sound card and have the volume maxed. Only getting 1/4 watt. Any ideas appreciated. Tim N7LVB

Just had to brag about my V6!? I am up at our cabin, in OK, for the summer and do several POTA activations per week with my uBITX and it has worked flawlessly!? These past several days I also chased

Fldigi here.? Looking at my log and grouping by modes, I might have the award for most digitally diverse.? See list below.? I can say that until proven wrong. hahah. Note, some modes require their

Ashhar, You are being too kind. I am using Fldigi version 4.1.23 running in Raspbian on a Raspberry Pi 3B. The Pi is the microprocessor part of the Nexus DR-X crosspatch that Budd Churchward, WB7FHC,

One more tiny typo in the RTTY/PSK31 section: on should be "or" I believe? Thanks again, Lucas W1BTR

Looks like you wanted to direct the users to read more about the unix "DATE" command somewhere, but never finished the sentence. Great manual so far! Super excited for this radio!!! Thanks for all

Fixed it. You can mail me directly with the subject "sbitx operating manual" [email protected]> wrote:

Hello Ashhar,Where do people submit "comments, corrections, or suggestions" on the sBitx Operating Manual? I think you meant PSK31 instead of PS31 on page 1. Here is the paragraph: This radio is a

Stephen, My admiration knows no bounds considering that I spent a day trying to get two sbitx talk in bpsk31. What software do you wield? wrote: