开云体育

Does anyone know of a USB 3 to HDMI adapter? I would like to have a second display without adding a hole in my case. John

But where do you find N750 capacitors?? New availability is close to non-existent, and supplies on eBay are limited. Temperature compensation in commercial gear is a lost art. Nobody uses VFOs any

A couple additional comments on the PTO. The brass tubing is 1/4 inch OD. I cut the slit by doubling up a Dremel cut off wheel. My Shakey hand is evident with the cut. The head of the 10-32 screw was

That's pretty slick, nice build. The N750 cap is the magic to getting the VFO stable.? With patience less than 10hz is not out of reach. A TinySA is handy for looking for spurs mine get used a lot. I

Allison, here is a pix of my PTO. The limited coverage is FB for my needs. This is going to be a CW rig and not SSB. Stability of this PTO from a cold start is about 60hz. I used a combination of

Thanks. One of the first things I did when I received the unit was to archive the image, which I found and am using now.

I had previously copied the original image on the SD card. I found it and burned it onto another 32GB micro SD card. This time the sBitx boots with the normal schematic diagram on a yellow background.

My error: I used the Raspberry Pi Imager to write it. Good Luck [email protected]> wrote:

Try this link below and download the zip file under code. Use Belena Etcher to write to the new SD card. It worked for me.God luck. https://github.com/afarhan/sbitx.git

Since it tunes in parallel, my SWAG is VFO (has spurious oscilation) or Crystal filter (has secondary peak).? Least those would be the first places. To get wider band coverage more L (inductor) less

I've tried to download the image several times, with both a win7 machine as well as a linux box. They always fail around 2.5 gig into the download. I was using chrome on both boxes.? Good luck Max

./build sbitx finishes

John, Check this out. https://www.vu2ese.com/index.php/2022/07/20/the-sbitx-the-sdr-for-the-homebrewer/ The very first section under the heading ' For those who can’t wait' deals with it. Hope that

And the background of the schematic diagram seem to have been replaced by the default temple photo

in the terminal the build command does return as expected with the command line prompt. What hangs is the GUI which appears to be attempting to bring up the sBitx window. Other GUI functions are

Where can I download the complete image for the SD card for the Raspberry Pi for the sBitx?

Gerry, You can use the uBitx Mic with the sBitx. They are interchangeable. Thomas -- *Support@HFSignals*

Thank you for the information. I will review the manual again. I rewired the plug according to the TRS requirements. I would like to know the requirements on the actual wiring of the mic. Does PTT

I have a uBITX V6.? Will its mic work with the sBIT? Gerry Sent by the Thunderbird