开云体育

Hey ecc, That was the solution!? It was pretty simple: tell the OS to only use the touchpad mouse on the DSI screen and every thing lines up. In my case the terminal command is: xinput map-to-output

Rolf and Scott, thanks for the reply. Yes, I was thinking of building the digital board on an RPi400, it has 2 hdmi ports. -- 73, Gyula HA3HZ

Getting closer. Maybe need longer brass screw. Thinner walls for toroid. Outer toroid proportions look off, somehow. Still, this is progress.

I haven't tried it, but since the GUI seems to be built on X11, this approach should work: https://askubuntu.com/questions/1201967/lock-the-mouse-cursor-to-one-screen-in-linux-ubuntu wrote:

Hi All, One thing I have noticed is when two monitors of differing resolutions are enabled, in my case the DSI and HDMI 0, an external mouse works fine on both screens in a typical "extended desktop"

Hi Gyula, If I understand your question correctly, if you do not use the DSI port, yes, you should be able to use the two (2) HDMI ports.? The RPi can support two monitor ports and yes, you'll need

Not sure what you want to do, but if you want the pc to send Morse code you can use the mic input and select CW mode 73 Evan AC9TU

I have an old rigblaster set up for digital work with my uBITX. Works great. I can plug it into the mic connector and it properly triggers PTT and plays audio. However, when hooking the same exact

Thank you, Ashhar. The Calibrio format is listed for LOTW. J

Evan, Thanks! Will add them this morning! 73 Mark AJ6CU

John, The logfiles are in calibrio format. They are in the data subdirectory/home/pi/sbitx/data/logbook.txt wrote:

While waiting for the power mod I am looking at LOTW. I can read that the Pi LOTW app needs to upload ADIF-type files. I don't read that file type from the currently installed loger. Has anyone

Group, general question on the plastic toroid material. I know the higher the Q the better but with the printed toroid what is the general range of the different plastics? Any one have any numbers on

Once again thank you Evan. I went through my parts and I actually have all of the parts for the S-Meter on hand. What would be a good way to secure the second Nano inside the uBITX? i do not think

Some days ago Ashar described what needs to be changed for a different solution. It did not seem to be a very big issue. From my experience you won‘t need a touch screen in order to operate the

Scott, Thanks for the excellent field report and the great pictures. I like the idea of attaching a second monitor to support third-party applications, and and glad to hear about your successes with

I've not tried the configuration you describe, but I can confirm that the mouse is able to fully take the place of the touch interface, meaning the mouse can be used on any screen element. The next

Hi, has anybody already connected a microphone with 2.5mm and 3.5mm Trs to the sBitx? Vy73 de Rolf, DL8BAG

That looks like the one...many thanks!

Mark, There are other screens from KN4UD and K3RTA. These are the ones that I have: 73 Evan AC9TU