开云体育

Any links to messages for these thousands you speak of?? I used a decoder when learning CW to verify if I was copying correctly. I also used a decoder when learning to send CW. If it copied me

If it was just sitting there on, but not doing much, then that is not much of a test. You measured the temp with it indoors and sitting there. What will happen if you use it portable on a hot day? And

Hi Steve- Yes, I'm aware of the screensaver and that's not the problem.? Upon further investigation I removed the Pi + touchscreen and checked the voltage on pins 2 & 6 on the Pi header on the digi

See my announcement of the github for Nextion screens. Long overdue... Let me know what we are missing! 73 Mark AJ6CU

If you go the Nextion route, here is a link to someone that has done this: http://ubitx.net/2020/01/06/a-v6-nextion-display-conversion/ I have also seen Raduino clones with a "nextion" on Ebay

I have created a github repository for Nextion screens used with the KD8CEC software.? The repository lives at: https://github.com/AJ6CU/Nextion-screens-for-uBitx-KD8CEC-firmware This repository

I am actually in the process of getting all the Nextion files I can find in one place on github. Probably a couple more hours and then i will ask folks to tell me what I missed. :-) 73 Mark AJ6CU

Looks like the larger Nextion files are in the files section under AJ6CU Will have to bring that project to the top of the pile! Vince N2AIE

Hi. Wonder if you have the load for a 5 inch Nextion?? CEC load..still on an old ubitx (haven't looked at it in a while but think it was a 4)? have it running with the smaller Nextion. but wanted

Gerry, Before you go to the expense of buying a Nextion screen (The KD8CEC software does not work with the stock display), I would try the N8ME software that is listed in the files section of the

Hi Paul; Just checking that you know the screen will go dark after a period of inactivity. You have to touch the screen to wake the sBitx up. 73; Steve, N3SB

https://www.ebay.com/itm/294069658015

sBITX #59 was working well until the display went dark.? I? was monitoring digi traffic and left the rig unattended for a couple of hours.? When I returned the screen was dark.? Testing confirmed

Farhan Rpi 4b 2018

This has probably been answered before.? I have a uBit 6 with its original display.? I understand that KD8CEC has written the best upgrade software.? How do I install this, & what version do I

Which raspberry pi are you using?

OK, looks like it is time to rev all the screens. The newer Nextion screens that you *buy right now* all require that the tft file be generated with the latest Nextion editor. The good thing is that

Farhan, all Ok some progress today. Verified that the 12v and 5v are present before, during and after the reboot. I do hear a relay click when I select CQ then the Sbitx stops working and reboots. I

Here are instructions for the 3" screens that would work for the 4.3" screen: https://ubitx.net/mod-add-colour-touch-screen/ The screen files are here:

For digital modes on any of 6 uBitx, I use CAT control through the Nano USB port on the Raduino board.? For sound using desktops and laptops running Windows 10, as well as a Raspberry Pi running