开云体育

Got my DHL box yesterday and connected up my Pi4 and screen, connected an antenna and 12v and the unit was working. I could hear CW and SSB. Figured I'd do the setup today. So today I go through the

Haako Desoldering station are more expensive than I can handle right now. Anyone know of a great rework station under $300? 73, Joe W2JEJ

Greetings, A few initial observations: 1) Several times I’ve gotten the rig into a weird state where CW sending from the keyboard just cycles in and out of transmit and receive, and the only way to

Mine (#45) arrived yesterday and the display today. I already had a spare Pi 4 4GB. Some observations: The DSI connector on the display is a PITA. With the DRIVE_BIAS POT all the way counterclockwise

We had this same discussion when the uBitx came out, some thought the uBitx should have its own group because they didn't want to be bothered with all that newfangled uBitx stuff when reading up about

The link to the pdf of the circuit diagram is just below the circuit diagram on the writeup. Having multiples groups will become unmanageable for me. I don't expect much traffic for Daylight radio as

sBitX #39 arrived here in PA / K3 land yesterday (Friday).? DHL originally estimated Tuesday next week for delivery. #39 is powered up and just got a fresh git pull and build.? I also got the

Dear group, Is there NOW one presently or is there? going to be a separate groups.io page for the DAYLIGHT RADIO? Also is the a better high definition schematic of the DAYLIGHT RADIO somewhere? Also

Ashhar - also seems that sbitx_ft8.c is missing. Can not do a build/ 73 Lou KI5FTY

Thanks peter I used git stash && git pull && git pop first but had to deal with merge then I just copied it. Much easier if Ashhar just removes it since the program autocreates a new file if it is

Try the following.. mv ./data/user_setting.uni /tmp git pull mv /tmp/user_settings.ini ./data Will get around the problem until Ashhar updates the repo. Your suggestion is a good solution.

Hi Ashhar, I went to do a git pull and it failed due to a merge issue with data/user_settings.ini. user_settings.ini probably shouldn't be committed in the repo since it contains all the local

Thanks! I knew I was missing something. -John

Disconnecting power to the Nextion makes the whine disappear.

I've seen about 80 hours from Hyderabad to Winnipeg on an Antuino.? This was back just after Easter.? Still waiting for my sBit to ship. Gerry Sherman Sent by the Thunderbird

Mine arrived yesterday, a nice surprise with the DHL delivery date having been reported as Monday. Not even 5 days from ship to delivery, can't complain. You really have to see this thing up close to

Disconnecting power to the Nextion causes the whine to disappear.

I'm a long time customer and fan. Use a couple of the FX888s (one of the old analog models, one of the newer digitals), along with the battery operated iron, and the FR301 desoldering tool. Can't say

If you use the earphones it is not there. This is an LM380 issue.

The STL files are in a link on the write-up page. wrote: