开云体育

On Fri, Jul 1, 2022 at 08:19 PM, Ashhar Farhan wrote: > > Scott, > We will still be giving out the basic kit at a much lower price (about the > same as the ubitx). > The main board is almost twice the

Hi We use following applications with or withour vcoder dongle 1) Peanut 2) BlueDV Software with USB Dongle 3) Droidstar ( works on IOS/Android) 4) iax DVSwitch on Android /IOS 5) zello (non Ham) but

Awesome! ?Thanks Ashhar Scott

Scott, There is a provision to run any other software (I started with wsjtx) using the last of the mode settings : digital. You can run these additional modes like you would on a conventional radio.

Hi all, I just installed the N8ME firmware with VU3GAO mod and now I need to do calibration. I cannot find any guide to do calibration of uBitx with N8ME firmware. Can anyone help me ? Thanks Ashok

You’re very welcome! I run a 5” on my v3 ubitx. But going to upgrade it to a v5 that I have on my workbench. 73 Mark AJ6CU

Hi Ashhar, Thank you very much for the response.? I understand the timing bit.? My company has been having a rough go of it just getting certain IC stocks to build circuit boards.? We make UPS

After messing around for several hours, I found a post mentioning a 5 inch nextion file made by AJ6CU.? Downloaded that, uploaded with no issues and now I have all the screen populated by the image.

Mike, I am just about wrapping up the sbitx documentation. I will get to uploading the 3d files afterwards. You can switch to 4.915 MHz. It will make it difficult to add a frequency counter unless you

Cool design, I really want to try it. Will probably use BF998 in RX mixers. 5MHz IF may be a problem for US hams, because of the very strong WWV signal right on that frequency. Even the input bandpass

I have recently purchased a ubitx kit (V5) bundle which included a 5 inch nextion display and appropriate case.? I tried programming the nextion tonight and while the 5 inch nextion file seems to

Scott, We will still be giving out the basic kit at a much lower price (about the same as the ubitx). The main board is almost twice the size of ubitx. We had to use much more costlier transmit filter

Hi Ashhar, I too have been anxiously waiting for the sBitx.? I am a bit disappointed that the cost has creeped up but I do understand the problems.? You have to make money. I assume that the $500

Thanks! Will try that. Was following the instructions on: https://www.hfsignals.com/index.php/about-hfsignals/ That said to send to hfsignals@... 73 Mark AJ6CU

You can write to support@...

Hi, Been trying to reach HF Signals thru the gmail on their website. Just trying to confirm that the Raduino listed in the buy section of their website is compatible with a V5 board. 73 Mark AJ6CU

Brendon - Evan gave you a pretty good rundown of your questions.? The extra cable is for, I think, plugging in to the board and remote mounting some of the controls and jacks.? Referring to the

@David: this morning, I completed the video's of my 6 mtr transceiver. Hopefully you find enough information in the schematics that I included. Because the output is not as high as I wanted, I made an

Gordon, That will be available as well. So we got that covered too.

I don’t want to try to tell you how to run your business. I don’t know how much trouble it is to offer options. But you might consider offering it without the raspberry pi, but with the microSD