开云体育

Hello Peter, I’ve been trying to reach you via direct email about the boards I shipped and haven’t heard back. Perhaps my messages are getting caught up in spam folder? Best, Jim KM4TXR

This might help... http://www.hamskey.com/2018/05/setting-smeter-to-ubitx-with-cec.html

Don, To get to the v6 menu you press and hold in the encoder for 10 seconds or so until the settings menu comes up.? You then use the encoder to select the CW Keyer and then press the encoder to

Don Email me direct and we could brainstorm on antenna. My call at yahoo. Its summer, but bands aren't that dreadful overall. Ubitx not my favorite cw rig, still I have made hundreds of cw contacts

“Using” V6.1. Between the menu issue and the limited space for an antenna, and dead bands, I have not been having a good time. Thanks. Don

Hi Don, Which version of uBiTx do you have. and are there any modifications from stock? Most versions with stock displays are as Curt has stated.? You change settings through the encoder (tuning

Just fixing a secondhand uBITX from ebay. it's a v4 and it's running uBITX v0.20 +v1.200 firmware according to the start up display I'm puzzled by the bars in the 14th and 15th characters on the top

Press the tuning knob and then as you turn it you should see various menus. To select a topic press again, then you can scroll through the settings. If all else fails then find a YouTube video. My

Thanks. But Where is the menu?

There is a menu setting for choosing keyed or straight key. Step through menus, press the main tuning know to get there, and you will see things to adjust. I mostly use my ubitx on straight key,

When I plug in a straight key, my uBITX transmits a series of dots as long as the key is plugged in. How do I get the reg to properly see a straight key? KD7QW Seattle

The rev1 python scripts have been added to folders section /g/BITX20/files/AG5TX/bitxmap A dummy user placed on the Live layer in bitxmap google map SWL_John-Live

OM Abhrajit Wonderful news that alignment addressed it. People here will debate agc forever, it works fine without it, but I added a simple LED and photoresistor agc circuit that helps when tuning

Something from long ago … the first time I installed my shack at this QTH in about 1990, I put up a sky wave loop for 80M. Surprise, the 50kW AM BCB station a couple of miles down the road — on

Finally, my ubitx v6 RX issue solved, as per VU2ZAP guidance am check voltage in audio section like Q70, R50, R51, after check audio stage am confirm that audio stage is working fine, and TX stage

Deep I am happy to inform you all local broadcast interfere problem is solved when I tune frequency properly and BFO also. I noticed after that am not facing this type of problem. I think it's

Hi Mark, If I understand your situation, this is the second one that I have read about on this board.? That one also had a high RF situation so high that it took out Q90.? It seems these are

John, Thank you for the explanation.? It does make sense when you look at that strong of a signal.? I suspect the AM signal is being rectified by the audio detector and modulating the

Evan, I installed the filter originally after the AGC. I found I had strange distortions on the bands that I could not explain since the BCB filter I installed looked good on a sweep and had an

I am definitely not discounting the BCI nor the AGC, I will eventually do both.? I was merely sharing an experience I had.? I didn't have broadcast issues and then I did, in two different locations