开云体育

The radio is sold.

Emailed sent

I'm just not using it and have too may radios already. This is a complete in the black metal case, running the latest CEC software. Has a new 2.8" screen and the mod to reduce the sidetone volume. All

Hi, An obvious typo. Nobody should be shot over a typo. Some typos can be amusing. 73, Bill KU8H bark less - wag more

I deleted it almost immediately as I noticed the typo but not quick enough. I meant "shut". hopefully an Admin can delete it.Sent from my Galaxy

Funny how a slight misspelling in the topic, makes the meaning seem inappropriate -- 73 Dave ADOB ( https://www.qrz.com/db/AD0B ) Raduino bracket and Ham_Made_Keys (

I don't know about now but in the olde dayes the web based mail systems had a lag up to several days for those changes to take effect. It's like taking a carefree walk in the dog park and stepping in

Did the save several times no change. Thanks though.Sent from my Galaxy

I had a comparable problem. After a while I found out that selecting your choice of delivery was not enough, one has to scroll down the page and click “save”. That worked for me. Cor PA4Q Sent:

Hi everybody, Did anybody managed to add a GPS to external referente the SI 5351? Cheers, Rafael PU2UIT

Gareth, to expand on what Curt stated, it has the Si5351a clock chip to generate the LO signals needed as well as a Nano micro controller to control the rig.? It provides the interface to the display

Raduino is a little control board that all ubitx and some later bitx have to provide pll vfo and digital display. Enjoy your builds. Curt wb8yyy

When driving my little XDT-PA70 linear amp I use RV1 to keep the amp input below 5 W. I turn it up when not using the amp. Same as Evan I have not noticed reduced output purity -- 73 Mick VA3EPM

Heath provided a removal tool with their kits. I used to have several but you never have the tool you need when you need it. I probably put it in a place where I'd always find it when needed. Now I

I have joined this group because from a couple of years back I have a BitX kit which still awaits assembly, but don't know which version. (And also a QCX in the same state of disassembly) Reading this

Arv, Still receiving email notifications. Received 8 overnight...Not sure what’s going on so can you please have another look? Thanks

I have used similar tools to this in the past for control connectors at work. https://smile.amazon.com/s?k=B08295ZWL2&ref=nb_sb_noss I have ordered a set for myself.? Seems like a low-cost tool to

Very good idea, Mick. It will avoid possible confusion later, too. And it never hurts to keep things simple and direct. Bob — KK5R

Hello Bob Thanks for the reply.? Yes all to easy to injure yourself if you're not careful. I'm going use the new pre-wired connector that came with my V6 and just reconnect the encoder on the end.

Hi Andy Thanks for the information and the PDF. I can see now that I was getting A7 on the Nano confused with Pin 7 on the connector. Thanks for the clarification.? I've printed off the schematic.