开云体育

I think the Raduino is the name given to the display interface, which includes the Nano and the LCD display. If you are using software to upload to the Nano, Nano is the correct choice for the upload.

Begin forwarded message: From: BevTed Stanier <bevtedstan@...<mailto:bevtedstan@...>> Date: July 29, 2020 at 10:45:28 AM PDT To: BevTed Stanier

I did unplug the Nano from everything else and no change. Processors are ATMega328p, ATMega328p(Old Bootloader) and ATMega168 ATMega328p is selected. Should I try old bootloader?? Don’t see anything

Yup that was set okay. Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 Sent: Wednesday, July 29, 2020 9:58 AM To: [email protected]<mailto:[email protected]> Subject: Re:

Cable checks okay for continuity. Got verbose error msg. Arduino: 1.8.13 (Windows 10), Board: "Arduino Nano, ATmega328P" Sketch uses 22966 bytes (74%) of program storage space. Maximum is 30720 bytes.

Ted, Do as Allard suggested before purchasing anything. 73 Evan AC9TU

Ted, Can you verify that you have a Nano clone?? It could be that you have a Raduino that is not from HF Signals.? HF Signals uses Nano clones with the CH340 series of USB interfaces.? The

Ted, also make sure to select "AVRISP mkll" under Tools => Programmer 73 Allard PE1NWL

Evan Okay Comport set as you suggested. For some reason “Com&LPT” did not appear on Device Manager until I plugged in My Navigator and then the Nano. Something I set when setting the Navigator up,

Evan Yes using Windows 10. Looks like I messed up the Comport setup but got the rest okay. Now getting a sync error when uploading so will go back and redo the Comport as you suggest. Will let you

Ted, pick your flavor. https://amateurradiokits.in/store/printed-circuit-boards/ 72,73 de KC8CKZ

Is the bitx40 still available, or long gone?? I have a project in mind for one if theres a spare board or kit floating around. -ted

Expecting antenna parts today have to try Chuck Western Pennsylvania 73's -- LRB Chuck

Ditto here on antenna. Mainly picking up South America here. (Amazing since it's on my WSPR dipole @ 5'). Need to sneak it up. Victor, South Florida 72,73

I’ll have to try if my antenna is ok. AZ here!

Ted, I assume that you are using Windows as your OS.? If so, then I would suggest that you open the Device Manager through right-clicking on the Windows icon and selecting Device Manager. Open the

The cable is for a digital camera, mp3 player, to a computer so believe it is for data. I have more setup to do. Thanks Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

If it is a "Charging Cable" it may not have the data leads. If it is a data cable it will work for both data and charging. You do have to select the correct Arduino model and the correct boot loader

Vic and/or Dave Trying to update BITX40 with early Nano version. I found a cable at the Dollar Store that fits the Nano. It’s not blue and is fairly long. 6ft. Sketch compiles okay but upload fails

Reed, I did not hear anything.? As with you, the noise level here is extremely high.? Can only hear a few high power stations every so often. Thanks for trying.? Maybe we will have better luck