开云体育

hi bob -- I understand your point, but i must just purchase crappy sealed lead acids....mine NEVER make it to 13.6. They hang out in the 12's. It is also HOT here in Florida. That reduces the voltage

I run my v5 at 13.8 from a regulated supply with no problems . 73, Ora W9DJ

Keep in mind that those batteries that are lead-acid when fully charged are closer to 13.6V but that comes down to closer to 12V after some current draw. Therefore, a better question, for my part, is

Thank you.Sent via the Samsung Galaxy A10e, an AT&T 4G LTE smartphone

a 7amp hr sealed lead acid 12 volt battery with a 2 or 3 amp fuse does a very nice job. Gordon

Jack Okay. When we see you wearing alligator shoes we can assume that the gators have been tamed and you are ready for other problems! 8-) Arv _._ [email protected]> wrote:

Can someone tell me what DC power supply and maps per hour to use for the Bitx v6? Does 12 volts need to be stepped down to a certain value?

No I only have the Teensy T4

Actually I proved nothing except making the bands smaller allows it to compile!There is still lib issue of size! rOn

Hmmm...that leaves 26t bytes unused. Can you run it? Jack, W8TEE

Hi Peter, Although the Region 1 20M band may be close to 2X as wide as 40M, the frequency is also 2X higher- making the percentage bandwidth virtually the same. Regards, Dale W4OP Sent: Sunday, June

Played a little: bands.cpp #include "bands.h" //#include "utils.h" constexpr Band_t bands [] PROGMEM { //? {?????? 0UL,????? 255UL, 255, "U8"},//Utility conversion option //?

Arv: I'm not sure how to address it. One way would be to remove a header file include and measure the 1.8.12 and 1.8.13 sizes to see if the impact is uniform. However, that would not test the core

Reed & Jack I wonder if the bloat might be from some of the #includes or maybe in an update to the automatically included arduino.h ? How to find where it is coming from may be the real issue. Next I

Got the end-fed a little higher yesterday in an inverted V and was receiving pretty good. Used headphones to hear the weaker signals so I think I'm in ok shape. However, I don't think there's any

I think I know the case: I brought everything out to the front, except for the power, antenna, and ground connections. The mic is made from PCV pipe and the cartridge shipped with the kit. I have the

A little off topic but on March 9, Banggood shipped the enclosure for my uBitx V-6.? On June 18th, I received it, two days after Banggood issued a credit because I was sure it was lost in shipment.?

Sorry, My rep[ly obviously was not meant for the ubitX group. Dale W4OP Sent: Sunday, June 21, 2020 3:26 AM To: [email protected] Subject: Re: [BITX20] ANTUINO antenna analzer CERTAIN CLARIFICATIONS

Hi Peter, Thank you for the inquiry into our CW/SSB VHF/UHF Omnidirectional antennas. Despite 80+ hour weeks, we are running (xx) days behind- thank you for your patience. Please note- we are not