Re: Nextion Display on uBITX
#ubitx
#nextion
Got a V6. Full kit with enclosure. got a nextion 2.8 enhanced and I think I have loaded the correct software into it. Took a while to figure out that I could just copy and paste it to the MicroSD
By
ohwenzelph
·
#79269
·
|
Re: New uBITX v6
#ubitxv6
#signalink
#ubitx
Yes, it does, thank you, good sir!
By
Aaron K5ATG
·
#79268
·
|
Re: New uBITX v6
#ubitxv6
#signalink
#ubitx
This may be helpful, there are many many such exclamations probably better than this out there https://qsl.net/kx4z/DigitalConnections.pdf
By
Gordon Gibby KX4Z
·
#79267
·
|
Re: New uBITX v6
#ubitxv6
#signalink
#ubitx
Thanks. So I just need to run cables from the mic and phone straight to the PC with out an interface?
By
Aaron K5ATG
·
#79266
·
|
Re: New uBITX v6
#ubitxv6
#signalink
#ubitx
Aaron, Congratulations on the rig! You will have a blast with it.? Yes, it runs 60 just fine.? With the Nextion and the CEC firmware I save the 60 meters channels into channel memory and it is a
By
Dean Souleles
·
#79265
·
|
Re: New uBITX v6
#ubitxv6
#signalink
#ubitx
Aaron While many of us have bought a signal link cable for our rig, I don't imagine they sell one for ubitx. Its audio and ptt can feed into your microphone connection. As you have jumpers inside your
By
Curt
·
#79264
·
|
Re: Unbuilt NIB BitX40 Kit For Sale
SOLD...SOLD...SOLD
By
Jim WB2LHP in MI
·
#79263
·
|
Re: New uBITX v6
#ubitxv6
#signalink
#ubitx
I'm sorry friend, but I can't do cw, although a CW Keyboard will soon bless my shack. I have been listening to CW on it. To me the sound is pretty good. I have the default TFT display and I have not
By
Aaron K5ATG
·
#79262
·
|
Re: New uBITX v6
#ubitxv6
#signalink
#ubitx
have you tried cw? mine is V6.1 and the keying with a paddle was awful has that been fixed? or is it just me? i think when? i got mine it had been upgraded to where the display was not super slow but
By
ohwenzelph
·
#79261
·
|
Re: New uBITX v6
#ubitxv6
#signalink
#ubitx
I don¡¯t know about the version six, but I used to use my version three by just connecting to the mic & the speaker and the push to talk, the way I do with any rig, and it worked pretty well! I did
By
Gordon Gibby KX4Z
·
#79260
·
|
New uBITX v6
#ubitxv6
#signalink
#ubitx
Got my uBITX v6 in the mail this morning, 7 days ahead of the scheduled delivery day. I put it together in no time, I did not experience any problems at all, and before I knew it, it was on the air!
By
Aaron K5ATG
·
#79259
·
|
Re: Test equipment recommendations
Thanks for the heads up Jack. I hadn¡¯t spied that you were the author of that article! It¡¯ll be an interesting experiment that will hopefully contribute to my Intermediate licence. i snagged a
By
Leo
·
#79257
·
|
Re: Unbuilt NIB BitX40 Kit For Sale
No it has been posted as sold hope this helps?Sent from my Samsung Galaxy smartphone.
By
a.vision
·
#79256
·
|
Re: CW Menu missing CEC v1.2 Ubitx v6
Bob, Which code upgrade? ?The KD8CEC or Reed¡¯s? 73 Evan AC9TU
By
Evan Hand
·
#79255
·
|
Re: CW Menu missing CEC v1.2 Ubitx v6
Does the code upgrade address the TX/RX switching time delay? This seems to make paddle use a little difficult -- Bob NZ2Z
By
Bob Bennett
·
#79254
·
|
Re: Unbuilt NIB BitX40 Kit For Sale
Is this still available??? Interested... Justice will not come (to Athens) until those who are not injured are as indignant as those who are injured. Thucydides
By
Ted
·
#79253
·
|
Re: LIVE icon added to bitxmap.com
Of the 5 or 6 times that I looked, I was the only "Live" uBiTx on the map.? It might be useful if others would set their icon during the Sunday scheduled net.? At least then you would know that
By
Evan Hand
·
#79252
·
|
Re: LIVE icon added to bitxmap.com
I was able to display my "Live" icon. Did not see any other Live icons at that time. Man is never satisfied with what he has. Now, it would be nice to be able to see a list of "Live" stations along
By
Bob Fischer, Fischer Technical Services
·
#79251
·
|
Re: LIVE icon added to bitxmap.com
Has anyone used the new icon to show they were live?? How did it go? -- www.bitxmap.com ( http://www.bitxmap.com )
By
Doug W
·
#79249
·
|
Re: New V6 on the air
It would also be nice if someone could design a case for 3D printing. wrote: -- Larry Lovell 73's N7RGW http://QRVTronics.com <http
By
Larry Lovell <larry.lovell76@...>
·
#79248
·
|