开云体育

Thanks John, I hadn't seen that setting before. I'm sure that is the same setting that is available in Memory Manager. I will give it a try tonight.? ? I did not understand that there was a separate

Perhaps an sd card extender would be the solution. I use one on my 3d printer. 73 MM0BEF_______ Brian

Hello Dean, I simply used the settings from the menu on the rig. First enable settings, then return to the menu and extra settings are available like for the ssb bfo adjustment. I set mine so that I

I'd strip it down. Put it back to original specs, then work your way up. Just my 2 cents worth.

how much news can the fake news fake, while the fake news fakes, fake news? i have a v3 i took on trade, wont work on cw, has a small board added that has something to do with cw, has a push button

Thanks Evan, I used Memory Manager previously to set the BFO and master calibration for SSB and as far as I can tell they are spot on.? I am comfortable with using it. There is the CW (L/U) BFO

Jim I tried to see the adapter board manual and the link returned the dreaded 404 message, you might check it at your end. Skip Davis, NC9O

I have a beginning C book I can recommend! Also, I have been asked to do a programming series for Nuts and Volts, which is aimed at the "recreational" programmer. The goal is to point out how to avoid

Ditto here Ray also. maybe once we stumble onto a basic tutorial on using Arduino coding we will get familiar enough to understand what appears now to be baffle-gab hihi Andy

Just adjustment of? the setup bfo freq? are you referring to something else? I haven't got into using arduino edits to this point if there are software settings that can be modified. On 2020-01-06

Ray, I went ahead and made the issue for you just now: https://github.com/afarhan/ubitxv6/issues/4 ( https://github.com/afarhan/ubitxv6/issues/4 ) Reed

Reed, I'm the newest of noobs on this whole groups thing, I don't know what a pull request is or where to create one.? Pretty much the same for github.? ?I'm not sure its worth losing much sleep

TSW (the Triumvirate Skonk Worx of W0EB, W2CTX and N5IB) are pleased to announce the immediate availability of an inexpensive plug-in adapter that will allow a PJRC.com Teensy 4.0 with a 600 MHz

Good grief!? Okay maybe this cartoon wasn't imported everywhere (Charlie Brown). v5 is a very nice rig - its a v4 without the bugs I am dealing with.? enjoy the v5.? honestly I appreciate the work

Good catch on the "F", K7OME. Looks like it should be an 0xE2 instead. Best thing to do there would be to do one (or more) of the following: a) make the fix, and create a pull request for it (best) b)

Hello Steve, How can these people get away with it,i shall certainly make my feelings known about these people,that issue bodged up radios to con us europeans.My friend in the uk has similar problems

FWIW I did make the correction to 17 meters and now it works fine.? While I was in there I took out all the CAT related code as I don't plan to use this radio with a computer and I figured that would

I have read on Groups.io that the Nextion editor does have an invert setting that will allow for mounting the display with the microSD card on the top.? It would require downloading, installing and

RE: ease of screen reprogramming, might one be able to invert the display in Nextiin Editor, mount the screen upside down, and then have access to the card slot? It's worth a try. TedK3RTA

Sounds excellent. I may do what you did. I’m looking at ways to save on current and I really like the CDC code. If you remove the 5v from the display I assume the radio will still operate? With your