开云体育

I finally got the thing built, a V5, and with some trepidation, powered it up, fully expecting to see smoke coming out the cabinet. Oddly, I got sound out the speaker, albeit "tinny".? (I was a bit

Arv, that's exactly right! Roy WA0YMH

Reed, Well I felt adventurous for a moment but not anymore. It completely broke the the radio, I had to load your original code back on. It was off in la la land, i couldn't tune any frequencies and

Arv, That's not necessary, as they can simply be zipped and saved in the files section, like I already did, so we can keep all the information in one place.

yes the speaker works and I get band noise and antenna noise. but no signals heard. I tried cpu reset with same result. the gentleman from hf signals sayid something about missing jumpers in the v6

Jim, my LG Zone4 is always auto correcting to what I did not type or want, makes for extra editing. This uBITX V.6 is sounding interesting, but I have projects still not done, and due to health, may

I hate autocorrect. Should have been "bought the full kit" and "If you have the basic kit" instead of what my email program wanted me to say - LOL!. To reiterate though, as long as it has that 14 pin

If you start the rig normally, you can hold the button for around 7 seconds (feels like forever) and it will show you the settings options menu. I think a settings menu button would be a good addition

Paul, You can. Make sure it's a 2.8" display or it won't fit the mounting holes or the window area if you bout the full kit. If you have the basic key and are building your own case, you can even use

You can try it out and chances are good that it will work until you get a replacement. As to replacement, just make sure it has the same pin configuration and it should work. Jack, W8TEE

Hi Group! My UBITX6 arrived today - I am looking forward to building it!. The glass of the display seems to be cracked in the corner. Can I replace it with any ILI9341?320x240 display from ebay etc?

My issues resolved. (1) Cycling to TX was a faulty mic jack on the board. (2) USB/LSB incorrect was fixed by doing the alignment of Freq and BFO.? Works properly now. Bert N8NN

The entire write-up is here: https://ubitx.net/tag/k9hz/ and I believe someone made boards for this mod that you can purchase at OSHPark.com MRM Sent: Friday, January 3, 2020 3:53 PM To:

Thanks for the reply.? I had not seen that post.? Unfortunately, I don't see where it gets to that level of detail.? It may have been there at one time.? Many of the pics are no longer displaying.

Just pushed some updates to the pdq_gfx_update branch to fix the settings menus (and save another 210 bytes = 10% RAM). Based on Ashhar's comments at

Thanks Andy KG5RKP thats just what I need Regards Fred Aunger G6FJA

Hi Ashhar, 1. I switched the font because the program memory was pushing the limit (as I was making changes I ran out of program space a few times), and the new font is about 30% smaller in flash

Well I am getting closer. I have tried to get the new sketch loaded using a Mac, Ubuntu desktop and raspberry pi. Each attempt fails. The latest attempt on the raspberry pi did compile but it failed

Bill Thanks for the info. It would seem that if we want to make very high resolution images available to group members we may need to store them on G-drive or something similar and publish the URL for

Reed, Two questions, 1. I notice that the font you have used is different from the one in my repo. Is there a reason for that? 2. The frequency update in the original code painted only those digits