开云体育

Hi Joel, Try this, too... /g/BITX20/files/AGC%20BITX%20UBITX/AGC%20Details.pdf?fbclid=IwAR3gsSFpIW-WgVlFpl3Q9lQjie_gkdJpBMgKUGTwSM_vSECmRuJ3xRHH6cs

https://soldersmoke.blogspot.com/2019/05/kg7ssb-homebrew-ssb-in-tuscon-learning.html

I have a v3, but I'll get a pic for you with connecting points when I get home.

With socket for the Nano, or permanent soldered-in type? Ted302.981.6479 On Fri, May 31, 2019 at 12:54, PeteWK8S via Groups.Io<pmeier@...> wrote: New and unused $32 Shipped Paypal or

I am struggling to figure out how to interface the AGC board that came with Sunil's uBitx/Nextion case to a V4 uBitx board. I have the S meter all hooked up and calibrated per the instructions that

Right now, like most figures, those are the modeled values. We plan on doing our own field tests when we have the second version built. Jack, W8TEE

Hmmmm. I didn’t see any math to explain the quoted efficiencies of 40 or 90%......??

Well the good old standby is using a field strength meter around the compass at various distances from the antenna for transmit. I guess you can do the same thing with a point source on receive.

Replace 1 resistor. 470 ohms is a good choice. Saves a bit of current, makes the display last longer, less heat. Here's the link to how and where: http://www.nd6t.com/bitx/Backlight dimming I do this

Joe, Pretty much have the SA screen. Figured out the artifact issue when the slider is used. Going to make the slider a little larger since we have the room. Some more tidying up and then back to the

If you have an alternative model, we'd be interested in knowing about it. We are in the process of finding out which tests make sense and which are really little more than intellectual smoke.

Yep… that’s true… for ideal calculations. Sent: Friday, May 31, 2019 12:51 PM To: [email protected] Subject: Re: [BITX20] Preliminary results -- W8TEE/AC8GY Mag Loop Testing Not true. Our loop is

NEC4 will tell you all of that without building a thing… Sent: Friday, May 31, 2019 12:45 PM To: [email protected] Subject: Re: [BITX20] Preliminary results -- W8TEE/AC8GY Mag Loop Testing We are

Not true. Our loop is 40% efficient on 40M and 90% on 20M. See: Fw: [JackAl] W8TEE Mag Loop Testing | | | | Fw: [JackAl] W8TEE Mag Loop Testing | | | Jack, W8TEE

We are also trying to assess other factors, too, such as a counterpoise and its affect on performance. We may find that these "other factors" play no significant role in the antenna's performance.

Loop efficiency is dependent on size versus frequency. There are many articles on-line that discuss this. https://www.robkalmeijer.nl/techniek/electronica/radiotechniek/hambladen/qst/1986/06/page33/

In addition to the contrast control (Pin-3 on the LCD) you can add a resistor in series with power to the backlight diode. Resistor value can be determined by trying different values until it is right

New and unused $32 Shipped Paypal or Postal M.O. Pete WK8S

Hi Graham NJM 2073?did the trick for me; the output is very good and very loud.

I was able to use finally the NJM without issues; audio is really strong with the v2 model.