开云体育

Good evening, I'm looking for ideas as to some sort of integrated RF amplifier for this, preferably one that has additional filtering to make sure the spurs are fully dealt with. Matthew Pitts

I guess I've had enough fun with this radio and now it's time to move on.? I'm selling by UBITX V.3 in an Apache case. There is space for the mic and a battery pack to sit when the case is closed.

I had taken a bit of leave from my bitx-40 project several months ago when I could not get the Raduino working right. I could not upload the amunter sketch, or anything else. Best as we can tell, my

Definitely sounds like your just getting leakage/pickup on that pin. The inputs are considered "High impedance" and will only drain slowly so if there is a lot of energy floating around (and its a

I also suggest looking at: https://www.arvixe.com/linux_web_hosting And no, I have no interest in them, other than using them for something I have hosted,

I remember seeing that, too. If memory serves, use those for your min/max values when setting smeter break points in the mem manager. With the meter installed, you should get a fairy stable number

I will make one suggestion for an ISP.. Use a linux based server. Windows based servers get hacked very often.. Just a suggestion. Wayne WA2YNE

Yes, it has been. We think we are going to have to move the site to another ISP and start over. Jack, W8TEE

Jack, it looks as though the site may have been hacked again. Kevin VK3DAP / ZL2DAP

I’ve made some progress on the band scope. It’s stretched but I’m not sure if it correlates to the range of the slider. The slider spans about 500khz the smaller lcd versions was less. This

Hi, Trying to get a working s sensor for KD8CEC.?I enabled the analog (A7) S sensor and then turned it on in the ubitx database manager. ?I breadboarded one based on a blog post by KD8CEC. Although

Sorry...I haven't finished my coffee... here's the tft

Yep

Is this what I am looking for

If you want to fix that, just click on the p1 attribute on the right side (prob in px page) and click on Delete. You were compiling it correctly. Anyway, here is the new tft. Let us know if it works

Hi Kevin, It sounds like you may have accidently added a picture to the sketch. Let me recompile the hmi @270 degrees and I'll repost. Did you use my hmi or Ted's edited version (bigger tune step

Where's this daughter board that everybody's talking about? I went to the website and I see no reference to it whatsoever? Thanks, Roy WA0YMH

Adding 160m LPF will help a lot. MiguelWP4ZI On Thu, May 2, 2019 at 5:37, Lawrence Galea<9h1avlaw@...> wrote: Interesting. Which μbitx, 3, 4, 5? Can you make the LPF board separate or at

Dear I need one VU2NSK

Hi Nick, Put my name on one please. Regards Jean ON4AEF. Sent: donderdag 2 mei 2019 15:45 To: [email protected] Subject: Re: [BITX20] VK4PP Ultimate uBitx Daughter Board. #ubitx #filters