开云体育

Thanks Ron, I will give it a shot when I get home. I also didn't do the CECv1.122 properly so I am working on fixing that. Actually I am enjoying this a lot. A month ago I knew absolutely nothing

Thanks for the reply Jerry!! I do not have a scope or really the in depth knowledge to use one.? I did try to upload the firmware back to the raduino and that was successful.I guess there is no harm

and lastly -- sorry to not get this all into one message, hopefully it makes sense -- my BFO setting is 11.055.500.? The boards may vary some in production but if you put my numbers in for your

Aha, I missed that you already have the uBitx manager.? It really simplifies your calibration work.? You can put in a number like 131630 for master calibration and that should get you close (that's

Welcome to the world of fixing your own radio!? I had a very similar problem when I first loaded the CEC v1.122, I was confused by the calibration and BFO settings.? You probably lost your

Brian, I'd guess the Arduino Nano died. Can you still upload new firmware to the Nano? The good news is that they cost as little as 3 dollars, and are socketed on the Raduino to be easily replaced

I gave that a try and it doesn't give me the option to reset it. It opens up with the "Set Tune Step" menu.

Hi Adrian Delivery to Estonia $15. Payment with Paypal Gilles F1BFU /FR

Hi, Do you have an estimate of delivery to Estonia? Adrian wrote: -- Adrian Blake, VK2ALF 101 Mulach St Cooma, NSW, 2630 Australia Mobile +61 407232978 P?rna tn 3 Otep?? Valga

We have been providing the uBitx case for Nextion 2.4 Inch And 2.8 Displays as well as 3.5 Inch And 5 Inch Displays Case. New arrivals are for 3.2 Inch Nextion Display and 4.3 Inch Display colors

press the encoder and hold it pressed, Power on, choose factory defaults

Hello UHF Connectors. Gilles F1BFU /FR

Yes, interested, BNC or UHF connectors? Adrian wrote: -- Adrian Blake, VK2ALF 101 Mulach St Cooma, NSW, 2630 Australia Mobile +61 407232978 P?rna tn 3 Otep?? Valga Estonia Mobile +372

Here's another post from Raj, affirming that he was using a yellow S+M brand 1210 inductor. ??/g/BITX20/message/60678 Here, Raj says that TDK-EPCOS parts work as well? (EPCOS was

I am a complete newbie so it was only a matter of time before I broke something good. I have a V5 uBitx running CEC 1.22 software with a 3.5" Nextion screen. I had everything working fairly well. I

Sorry I forgot the pictures ---------- Forwarded message --------- De : F1BFU - Fr - 79 via Groups.Io <gilles.f1bfu@...> Date: mer. 3 avr. 2019 à 17:03 Subject: [BITX20] For sale

GitHub address for phdlee fork of ubitx https://github.com/phdlee/ubitx

I am very new to homebrew electronics and was thrilled when I built a working Bitx40 right off the bat.?I did several mods and tested each one along the way.?I was feeling quite confident.?I

For sale transceiver 40m (7mHz) HBR1HF *. SSB & CW modes *. 2x IRF 530 PA *. 25 watts HF *. Dimensions 150 x 150 x 56 mm for use in mobile or portable The set includes: *. The HBR1HF transceiver *.

For ale a Antenna tuner QRP ZM-2 ATU EMTEC bought October 2018. Little served. 90 dollards. Preferably Europe. F1BFU /FR