开云体育

OK thanks Mike, was interested to see your final product. Screen on your link looks nice. - Rich

Has anyone tried to us the LDG Z-817 autotuner meant to be used with the FT-817 with the uBitx.? -- John Faivre?WA9SGD

God what a PITA it wont read a 128gb microSD. When I format a 32gb microSD with the file the compiter reads as ok, it says "no file"!!!

Turn off rig. Sdcard into nextion (only 1 .tft file) turn on rig. Should see text about it loading. Will show successful when done. turn off rig remove sdcard turn on rig....? should see new screen.

OK so if I load the .tft file into the nextion that will make the screen work with the ubitx or is there another file needed to be loaded into the ubitx?

Laddie,? The files that end with .tft only go into the screen module itself, by means of a MicroSD card holding ONLY that one file on it at the time. If you're not happy with the 3.5" screen you

Rich, ? I am not sure what your asking? Do you want a pic of my installation or just the display. If you want a pic of the display look at this

Joe, Not known but for us it's a convenient place to probe! Just a reference point me to compare two boards. They are all where I want them, maybe a few more are required. There are not many number of

Thank you to all those who helped me. It went together well. All is working. Now how to install the firmware to get the Nextion 3.5 to work. I have downloaded these two files: v1.092 - 3.5″ Enhanced

Raj, Is there a place that documents all the TP points and their purposes? I know there is a breakdown of all the sections on hfsignals but I am trying to find a more in-depth break down of the

Received another board from vu2pop last night. S.No 007/2 from Farhan. Nothing much heard from the receiver and with a strong signal from the generator some distorted audio. Transmit was as bad, about

Earl, You have your caps lock on. There are some uilities which disable that key. I sometimes remove the key top! When you put in a case it is highly likely you accidentally plugged the raduino

Just put more on the site. -- David ?N8DAH Kit-Projects.com ( http://www.kit-projects.com ) Shop is open! ( Https://Shop.Kit-Projects.com )

Mike, can you send us a pic of the working display? - Rich WB2GXM

Earl Please notice there is an adjustment pot associated with the lcd display. It must be carefully adjusted to see letters and numbers. Try to get this working first. Since you can't see the

All, ? I was able to get this working today with the help with all of you. I used the file Laurence compiled for the second Arduino. I had to load the Ubitx with the Nextion_S.hex file. What is

Allison, If using BFR106E6327HTSA1 to replace all the 2n3904's in the transmit section, are the emitter resistor values described in the Wiki still good? Thank you, Darrell WA7DSV

Try this link.?/g/BITX20/files/K7AGE/BITX40%20Voltage%20Measurments.pdf There is a files section, as well as a Wiki.? You can always try searching in there.? The files or wiki

There was one posted on one of the groups. But may have been on facebook. I don't recall now. I will try to remember and look for it later.

Where can I get a voltage chart for Bitx 40? ve1awc@...