开云体育

i would be interested in a kit

Given that coupling has been determined to be at least a major contributing issue a couple of us ordered relays to upgrade our V3 boards.? Perhaps simplistic questions without merit, but looking at

Hi William. The short answer, maybe. (I apologize if you already know the following; but for those who do not...) Digital frequency readout is only as accurate as the calibration of the sending and

Those unused wires come out of the connectors very easily.? Just push down on the tab on the connector with a needle or jeweler's screwdriver and pull them out.? You can put them back in if you need

Are isolation transformers not necessary?

with scarce time consider setting up a rig or transmitter to do WSPR, while you engage in whatever activities.? something like a qrplabs U3S or a rig/PC.? at the end of the half hour, pull up the

I tweaked my ubitx so I have an 'all in one' rig for FT8 and other digi modes, including CAT control (FT-817 emulation). Added an un-powered 4 port USB hub inside the rig and used a cheap USB sound

Anthony This is a great list. Really appreciate your sharing Thanks 73 Art N2AJO

in the HBTE group there are people who are interrested. There is one that has been inspired by SPECAN and Swwperino. This topic was initiated by Arv. I myself started to think about it by taking

Thanks Ma'am.? I'm staying on the porch.? hi hi

Hi Farhan How about seeing who would be interested? Seems that a lot of people on this forum may be interested. Regards.

Hi POP gm, the pic posted by you are very useful tnx and best regards murthy vu2chr

Hi Mesha, This guy using FT8 on an Asus Tinker Board ( https://kj4z.wordpress.com/2017/09/17/ft8-on-the-tinker-board/ ) , a Raspberry Pi clone, but much faster.? While it might be a bit overkill,

The W on the Pi is very delicate.? I routinely knocked it out with playing with WSPR at 100mW using the TAPR shield.? Separating the shield from the Pi from 10cm jumpers fixed the problem with both

Diane - the crud is in all modes, just easy to see on psk.? I have a date with a smart guy & his scope on Friday.

jerry, no secret here, but i do dream of swapping the arduino with a raspberry pi W .... - f [email protected]> wrote:

I had the same problem when transmitting with the mike (not CW) ?which I couldn't resolve with the solutions proposed in the posts I could find. I resolved the issue by installing a capacitor between

MAYBE I AM MISSING SOMETHING, BUT ARE ALL uBITX V4.3 RADIOS HAVE A ONE KHZ LOW READOUT. FOR EXAMPLE, IF I HAVE A STATION ON 7.150 SELECTED, IT READS OUT 7.149 FOR CLEAR RECEPTION. IS THIS NORMAL?

That's a very good deal for somebody, and a very kind offer. 20mhz of BW is good enough to debug stuff at 40 and 80 meters, and maybe a little higher too if you know what to expect. Suitable scope

Hmm. Sounds like some future uBitx v5 may prove interesting. The QSX looks promising too, but not very hackable. Jerry