开云体育

With reference to the article, where the?AXICOM type D2n V23105- *A5476* -A201 is described as the best relay http://www.i1wqrlinkradio.com/antype/ch97/chiave50.htm I have located some of these in

Taxes may make the difference and it is well possible you buy goods at more favorably prices (and sometimes of better quality) outside the country. It's called microeconomics.

I would be willing to pay extra just for the chance to meet ashar. KF4FTR

By any god/s you care to name! I'd be astonished to find NZ produce cheaper overseas! What sort of upside-down system are you living in?

All Be careful using SMD inductors in Low Pass Filters: they may have trouble handling the required power, and the lower Q may affect the filter characteristics. Also be careful using SMD inductors in

Am 14.10.2018 um 23:57 schrieb Joe Puma: Hello Joe, It is not a big problem to get the HFD27 desoldered. A good desolder litz (I used 2,5mm from Felder) and a bit judding and pulling an they will come

It picks up TX signal just like L5. L1 is the worst. If you put uBitx on the analyzer and bring your finger near L1 you will see huge comb like oscillations. SMD removes that. Probably due to Hi Q of

can you forward me the email that you wrote to hfsiganls? i will follow it up with them - f infosamaphoto@...> wrote:

it is easier (and probably cheaper) to buy it abroad. there are extra taxes in india. - f wrote:

Would be there at significant advantage to replace all the 5 relays, or is enough to replace only the three at the PA LPFs?

Raj, what is wrong with the stock 30mhz LPF?

Indeed, 60m, 4m, 1.25m and 33cm are not allowed in many countries. Il 15/ott/2018 04:41, "Curt via Groups.Io" <wb8yyy@...> ha scritto:

Good morning Brian yes the raduino is connected right, it's the first thing I looked at .. It has never worked! They replaced my motherboard but nothing changed! So only the raduino is left! Before

It is exactly the same. S+M seems the brand. To replicate my board best to use these. Thanks for locating the source. Also buy some 331 for the 30MHz LPF filter.. 4 per board. Raj

Hi, Sometimes the calibrations are off enough to reverse the USB and LSB settings. I assume they were initially set correctly, but somehow get changed. If you hunt around in the messages you will find

I am travelling to India soon and would like to pick. A coupe Bitx40's any idea where I might find any near Mumbai?

Yes USA. Direct copy of FCC part 97 Para. 305. Mike K5ESS Sent: Sunday, October 14, 2018 9:42 PM To: [email protected] Subject: Re: [BITX20] Emissions allowed In Band Segments You didn't specify which

You didn't specify which nation or itu region. This looks like maybe a USA list, no 4m band etc. These nuances do vary some around the world. Curt

Hi Sergio, Have you got the wiring of the Raduino to the Bitx40 main board correct? The brown wire from the Raduino connects to the black wire on the main board connector and the red wire from the

Here are snapshots for 20 and 10 meters after the relays were replaced with the Axicom components. Sorry, I didn’t capture the harmonics profile at 14.2 and 28.8 Mhz before the relay change but