开云体育

Amen! Roy WA0YMH wrote:

-- If there were only a couple messages a day it might make sense to keep everything together.? But I have received over 3000 digests, and it has become nearly impossible to determine which flavor

Alison i have put my uBitx on the shelf and plan no further work on it. Just too many issues trying to make a Ford out of a tricycle. I put these up as an assist for those still trying.? WA8TOD

Warren, That is indeed a mess. One place to look is pull power to the amp.? Look at the output of the 9 element 30mhz filter peak level should be under -10dbm.? ?The stuff you will see there is not

Distortion is the likely animal.? If its more than 40db down that is not bad and not to worry about it. To see IMD you need two equal tones inside the filter pass band with non harmonic relationship.

There are other versions of 2n2222 in SMT, DXT2222. The MMBTh10 is better than the 3904 as is the SMT 2n2369 (mmbt2369) and BFR106. As to voltage that spot (Q90)should not see more than maybe 16V

Mag loops...? Mis named.? ?Resonant small loop. They run about -12db on 40M for a soso one and maybe -10db for a good one compared to a dipole at 40ft or more.? This is for a 1M diameter loop at

Ajay, The map below shows most of my QSO's with a Myantennas EFHW-8010P fed with 50' RG8X direct from my ?BITX. ? -- www.bitxmap.com ( http://www.bitxmap.com )

IF we don't take advantage of groups.Io for other topic centric groups we end up with mush. Why do that?? Because people interested in antennas and not bitx interest will likely not look here. Might

Ajay, Just one clarification: You may use a 49:1 transformer or you may use a tuner. You do not need both. Have fun! WA8TOD

There is already a homebrew group and an antennas group. Splitting the radios up would just make a mess of things. Vince - K8ZW. -- Michigan VHF Corp. http://www.nobucks.net/ http://www.CDupe.com/

Breakout boards http://tinyurl.com/yaf8wcdh http://tinyurl.com/y988tcx9 http://tinyurl.com/y7rqndjo http://tinyurl.com/y7be88cf _._

Cheers!

What we really need is an antennas group. Oh, wait... Vince.

Thanks a lot Warren, This sums it all. A EFHW antenna with 49:1 transformer, without radials with a tuner is a simple solution which seems to be workable solution. Encouraged with this enlightenment

Hi All, What is the consensus for a SMT replacement for the 2n3904? I note the MMBT10 only has Vceo of 25 vs 40 for the 2n3n04. I really do not want to tack leaded parts onto the board. My latest

ps ofcom reduces qrm by limiting power to 400 watts for a full licence. intermediate are limited to 50 watts and foundation to 10 watts.. i thinkt that is the big linear amps which cause qrm terry

i agree that this approach is not ideal but without lab test equipment it is the best available and is within the requirements of the uk ofcom. 73 de terry gm4dso

I made the attached files for my own reference during work on my uBitx which I have now suspended. But I thought they might be helpful for those still engaged in trying to filter the radio with

Dear John I have already done a image conversionfor for the 3.5" Nextion with *Microsoft Paint* but I do not know how to change the x,y,h,w . If you have the same LCD I can send you the files. Nikos